贪吃蛇游戏源码
❶ 求用vbs编写的贪吃蛇源代码
需用VB实现，代码如下
'定义蛇的运动速度枚举值
Private Enum tpsSpeed
QUICKLY = 0
SLOWLY = 1
End Enum
'定义蛇的运动方向枚举值
Private Enum tpsDirection
D_UP = 38
D_DOWN = 40
D_LEFT = 37
D_RIGHT = 39
End Enum
'定义运动区域4个禁区的枚举值
Private Enum tpsForbiddenZone
FZ_TOP = 30
FZ_BOTTOM = 5330
FZ_LEFT = 30
FZ_RIGHT = 5730
End Enum
'定义蛇头及身体初始化数枚举值
Private Enum tpsSnake
SNAKEONE = 1
SNAKETWO = 2
SNAKETHREE = 3
SNAKEFOUR = 4
End Enum
'定义蛇宽度的常量
Private Const SNAKEWIDTH As Integer = 100
'该过程用于显示游戏信息
Private Sub Form_Load()
Me.Show
Me.lblTitle = "BS贪食蛇 — (版本 " & App.Major & "." & App.Minor & "." & App.Revision & ")"
Me.Caption = Me.lblTitle.Caption
frmSplash.Show 1
End Sub
'该过程用于使窗体恢复原始大小
Private Sub Form_Resize()
If Me.WindowState <> 1 Then
Me.Caption = ""
Me.Height = 6405 '窗体高度为 6405 缇
Me.Width = 8535 '窗体宽度为 8535 缇
Me.Left = (Screen.Width - Width) \ 2
Me.Top = (Screen.Height - Height) \ 2
End If
End Sub
'该过程用于重新开始开始游戏
Private Sub cmdGameStart_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Beep
msg = MsgBox("您确认要重新开始游戏吗？", 4 + 32, "BS贪食蛇")
If msg = 6 Then Call m_subGameInitialize
End Sub
'该过程用于暂停/运行游戏
Private Sub chkPause_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
If Me.chkPause.Caption = "暂停游戏(&P)" Then
Me.tmrSnakeMove.Enabled = False
Me.tmrGameTime.Enabled = False
Me.picMoveArea.Enabled = False
Me.lblPauseLab.Visible = True
Me.chkPause.Caption = "继续游戏(&R)"
Else
Me.tmrSnakeMove.Enabled = True
Me.tmrGameTime.Enabled = True
Me.picMoveArea.Enabled = True
Me.lblPauseLab.Visible = False
Me.chkPause.Caption = "暂停游戏(&P)"
End If
End Sub
'该过程用于显示游戏规则
Private Sub cmdGameRules_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Beep
MsgBox " BS贪食蛇：一个规则最简单的趣味游戏，您将用键盘" & Chr(13) & _
"上的4个方向键来控制蛇的运动方向。在运动过程中蛇" & Chr(13) & _
"不能后退，蛇的头部也不能接触到运动区域的边线以外" & Chr(13) & _
"和蛇自己的身体，否则就游戏失败。在吃掉随机出现的" & Chr(13) & _
"果子后，蛇的身体会变长，越长难度越大。祝您好运！！", 0 + 64, "游戏规则"
End Sub
'该过程用于显示游戏开发信息
Private Sub cmdAbout_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Beep
MsgBox "BS贪食蛇" & "(V-" & App.Major & "." & App.Minor & "版本)" & Chr(13) & Chr(13) & _
"" & Chr(13) & Chr(13) & _
"由PigheadPrince设计制作" & Chr(13) & _
"CopyRight(C)2002,BestSoft.TCG", 0, "关于本游戏"
End Sub
'该过程用于退出游戏
Private Sub cmdExit_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Beep
msg = MsgBox("您要退出本游戏吗？", 4 + 32, "BS贪食蛇")
Select Case msg
Case 6
End
Case 7
Me.chkWindowButton(2).Value = 0
Exit Sub
End Select
End Sub
'该过程用于拖动窗体_(点击图标)
Private Sub imgWindowTop_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
ReleaseCapture
SendMessage Me.hwnd, WM_SYSCOMMAND, SC_MOVE, 0
End Sub
'该共用过程用于处理窗体控制按钮组的相关操作_(锁定、最小化、退出)
Private Sub chkWindowButton_MouseUp(Index As Integer, Button As Integer, Shift As Integer, X As Single, Y As Single)
If Button <> 1 Then Exit Sub
Select Case Index
Case 0 '锁定窗体
If Me.chkWindowButton(0).Value = 1 Then
Me.imgWindowTop.BorderStyle = 0
Me.imgWindowTop.Enabled = False
Else
Me.imgWindowTop.BorderStyle = 1
Me.imgWindowTop.Enabled = True
End If
Case 1 '最小化
Me.WindowState = 1
Me.chkWindowButton(1).Value = 0
Me.Caption = "BS贪食蛇 — (V-" & App.Major & "." & App.Minor & "版本)"
Case 2 '退出
Beep
msg = MsgBox("您要退出本游戏吗？", 4 + 32, "BS贪食蛇")
Select Case msg
Case 6
End
Case 7
Me.chkWindowButton(2).Value = 0
Exit Sub
End Select
End Select
End Sub
'该过程用于设置蛇运动速度的快慢
Private Sub hsbGameSpeed_Change()
Me.tmrSnakeMove.Interval = Me.hsbGameSpeed.Value
End Sub
'该过程用于通过键盘的方向键改变蛇的运动方向
Private Sub picMoveArea_KeyDown(KeyCode As Integer, Shift As Integer)
Select Case g_intDirection
Case D_UP
If KeyCode = D_DOWN Then Exit Sub
Case D_DOWN
If KeyCode = D_UP Then Exit Sub
Case D_LEFT
If KeyCode = D_RIGHT Then Exit Sub
Case D_RIGHT
If KeyCode = D_LEFT Then Exit Sub
End Select
g_intDirection = KeyCode
End Sub
'该计时循环过程用于计算游戏耗费的秒数并显示
Private Sub tmrGameTime_Timer()
g_lngGameTime = g_lngGameTime + 1
Me.lblGameTime.Caption = g_lngGameTime & "秒"
End Sub
'该计时循环过程用于控制蛇的行动轨迹
Private Sub tmrSnakeMove_Timer()
Dim lngSnakeX As Long, lngSnakeY As Long, lngSnakeColor As Long
Dim lngPointX As Long, lngPointY As Long, lngPointColor As Long
Randomize
Me.picMoveArea.SetFocus
Me.picMoveArea.Cls
'确认蛇头的运动方向并获取新的位置
Select Case g_intDirection
Case D_UP '向上运动
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_OldX
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_OldY
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_CurY - SNAKEWIDTH
Case D_DOWN '向下运动
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_OldX
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_OldY
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_CurY + SNAKEWIDTH
Case D_LEFT '向左运动
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_OldX
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_CurX - SNAKEWIDTH
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_OldY
Case D_RIGHT '向右运动
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_OldX
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_CurX + SNAKEWIDTH
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_OldY
End Select
'根据新的位置绘制蛇头
lngSnakeX = g_udtSnake(SNAKEONE).Snake_CurX
lngSnakeY = g_udtSnake(SNAKEONE).Snake_CurY
lngSnakeColor = g_udtSnake(SNAKEONE).Snake_Color
Me.picMoveArea.PSet (lngSnakeX, lngSnakeY), lngSnakeColor
'移动蛇身体其他部分的位置
For i = 2 To g_intSnakeLength
g_udtSnake(i).Snake_CurX = g_udtSnake(i - 1).Snake_OldX
g_udtSnake(i).Snake_CurY = g_udtSnake(i - 1).Snake_OldY
lngSnakeX = g_udtSnake(i).Snake_CurX
lngSnakeY = g_udtSnake(i).Snake_CurY
lngSnakeColor = g_udtSnake(i).Snake_Color
Me.picMoveArea.PSet (lngSnakeX, lngSnakeY), lngSnakeColor
Next i
'更新蛇旧的坐标位置
For j = 1 To g_intSnakeLength
g_udtSnake(j).Snake_OldX = g_udtSnake(j).Snake_CurX
g_udtSnake(j).Snake_OldY = g_udtSnake(j).Snake_CurY
Next j
'判断蛇在移动中是否到了禁区而导致游戏失败
If m_funMoveForbiddenZone(g_udtSnake(SNAKEONE).Snake_CurX, g_udtSnake(SNAKEONE).Snake_CurY) Then
Beep
MsgBox "您的蛇移动到了禁区，游戏失败！", 0 + 16, "BS贪食蛇"
Me.tmrSnakeMove.Enabled = False
Me.tmrGameTime.Enabled = False
Me.picMoveArea.Visible = False
Exit Sub
End If
'判断蛇在移动中是否碰到了自己的身体而导致游戏失败
If m_funTouchSnakeBody(g_udtSnake(SNAKEONE).Snake_CurX, g_udtSnake(SNAKEONE).Snake_CurY) Then
Beep
MsgBox "您的蛇在移动中碰到了自己的身体，游戏失败！", 0 + 16, "BS贪食蛇"
Me.tmrSnakeMove.Enabled = False
Me.tmrGameTime.Enabled = False
Me.picMoveArea.Visible = False
Exit Sub
End If
'判断蛇是否吃到了果子
If m_funEatPoint(g_udtSnake(SNAKEONE).Snake_CurX, g_udtSnake(SNAKEONE).Snake_CurY) Then
'累加玩家的得分并刷新得分显示
g_intPlayerScore = g_intPlayerScore + 1
Me.lblYourScore.Caption = g_intPlayerScore & "分"
Call m_subAddSnake '加长蛇的身体
Call m_subGetPoint '获取下一个果子的位置和颜色
Else
'绘制果子
lngPointX = g_udtPoint.Point_X
lngPointY = g_udtPoint.Point_Y
lngPointColor = g_udtPoint.Point_Color
Me.picMoveArea.PSet (lngPointX, lngPointY), lngPointColor
End If
End Sub
'该私有子过程用于初始化游戏
Private Sub m_subGameInitialize()
Erase g_udtSnake '清空蛇的结构数组
g_intPlayerScore = 0 '清空玩家的得分
g_lngGameTime = 0 '清空游戏耗费的秒数
g_intDirection = D_DOWN '设定蛇的初始运动方向为下
g_intSnakeLength = 4 '设定蛇的初始长度
ReDim g_udtSnake(1 To g_intSnakeLength) '重新定义蛇的长度
'定义蛇头部的数据
With g_udtSnake(SNAKEONE)
.Snake_OldX = 530
.Snake_OldY = 530
.Snake_Color = vbBlack
End With
'定义蛇身第2节的数据
With g_udtSnake(SNAKETWO)
.Snake_OldX = 530
.Snake_OldY = 430
.Snake_Color = vbGreen
End With
'定义蛇身第3节的数据
With g_udtSnake(SNAKETHREE)
.Snake_OldX = 530
.Snake_OldY = 330
.Snake_Color = vbYellow
End With
'定义蛇身第4节的数据
With g_udtSnake(SNAKEFOUR)
.Snake_OldX = 530
.Snake_OldY = 230
.Snake_Color = vbRed
End With
Me.picMoveArea.Visible = True
Me.lblYourScore.Caption = g_intPlayerScore & "分"
Me.lblGameTime.Caption = g_lngGameTime & "秒"
Me.tmrSnakeMove.Interval = Me.hsbGameSpeed.Value
Me.tmrSnakeMove.Enabled = True
Me.tmrGameTime.Enabled = True
Call m_subGetPoint '获取第一个果子的位置和颜色
End Sub
接下面的
❷ 有贪吃蛇的源代码 拜托了 ！
你是用什么编的VC？还是turbo c？
我在网上找了下，发现了一个trubo c 的应该可以用，在VC上调试就一个错误，画图函数不支持，你试一试吧。
#define N 200
#include <graphics.h>
#include <stdlib.h>
#include <dos.h>
#define LEFT 0x4b00
#define RIGHT 0x4d00
#define DOWN 0x5000
#define UP 0x4800
#define ESC 0x011b
int i,key;
int score=0;/*得分*/
int gamespeed=50000;/*游戏速度自己调整*/
struct Food
{
int x;/*食物的横坐标*/
int y;/*食物的纵坐标*/
int yes;/*判断是否要出现食物的变量*/
}food;/*食物的结构体*/
struct Snake
{
int x[N];
int y[N];
int node;/*蛇的节数*/
int direction;/*蛇移动方向*/
int life;/* 蛇的生命,0活着,1死亡*/
}snake;
void Init(void);/*图形驱动*/
void Close(void);/*图形结束*/
void DrawK(void);/*开始画面*/
void GameOver(void);/*结束游戏*/
void GamePlay(void);/*玩游戏具体过程*/
void PrScore(void);/*输出成绩*/
/*主函数*/
void main(void)
{
Init();/*图形驱动*/
DrawK();/*开始画面*/
GamePlay();/*玩游戏具体过程*/
Close();/*图形结束*/
}
/*图形驱动*/
void Init(void)
{
int gd=DETECT,gm;
initgraph(&gd,&gm,"c:\\tc");
cleardevice();
}
/*开始画面，左上角坐标为（50，40），右下角坐标为（610，460）的围墙*/
void DrawK(void)
{
/*setbkcolor(LIGHTGREEN);*/
setcolor(11);
setlinestyle(SOLID_LINE,0,THICK_WIDTH);/*设置线型*/
for(i=50;i<=600;i+=10)/*画围墙*/
{
rectangle(i,40,i+10,49); /*上边*/
rectangle(i,451,i+10,460);/*下边*/
}
for(i=40;i<=450;i+=10)
{
rectangle(50,i,59,i+10); /*左边*/
rectangle(601,i,610,i+10);/*右边*/
}
}
/*玩游戏具体过程*/
void GamePlay(void)
{
randomize();/*随机数发生器*/
food.yes=1;/*1表示需要出现新食物,0表示已经存在食物*/
snake.life=0;/*活着*/
snake.direction=1;/*方向往右*/
snake.x[0]=100;snake.y[0]=100;/*蛇头*/
snake.x[1]=110;snake.y[1]=100;
snake.node=2;/*节数*/
PrScore();/*输出得分*/
while(1)/*可以重复玩游戏,压ESC键结束*/
{
while(!kbhit())/*在没有按键的情况下,蛇自己移动身体*/
{
if(food.yes==1)/*需要出现新食物*/
{
food.x=rand()%400+60;
food.y=rand()%350+60;
while(food.x%10!=0)/*食物随机出现后必须让食物能够在整格内,这样才可以让蛇吃到*/
food.x++;
while(food.y%10!=0)
food.y++;
food.yes=0;/*画面上有食物了*/
}
if(food.yes==0)/*画面上有食物了就要显示*/
{
setcolor(GREEN);
rectangle(food.x,food.y,food.x+10,food.y-10);
}
for(i=snake.node-1;i>0;i--)/*蛇的每个环节往前移动,也就是贪吃蛇的关键算法*/
{
snake.x[i]=snake.x[i-1];
snake.y[i]=snake.y[i-1];
}
/*1,2,3,4表示右,左,上,下四个方向,通过这个判断来移动蛇头*/
switch(snake.direction)
{
case 1:snake.x[0]+=10;break;
case 2: snake.x[0]-=10;break;
case 3: snake.y[0]-=10;break;
case 4: snake.y[0]+=10;break;
}
for(i=3;i<snake.node;i++)/*从蛇的第四节开始判断是否撞到自己了，因为蛇头为两节，第三节不可能拐过来*/
{
if(snake.x[i]==snake.x[0]&&snake.y[i]==snake.y[0])
{
GameOver();/*显示失败*/
snake.life=1;
break;
}
}
if(snake.x[0]<55||snake.x[0]>595||snake.y[0]<55||
snake.y[0]>455)/*蛇是否撞到墙壁*/
{
GameOver();/*本次游戏结束*/
snake.life=1; /*蛇死*/
}
if(snake.life==1)/*以上两种判断以后,如果蛇死就跳出内循环，重新开始*/
break;
if(snake.x[0]==food.x&&snake.y[0]==food.y)/*吃到食物以后*/
{
setcolor(0);/*把画面上的食物东西去掉*/
rectangle(food.x,food.y,food.x+10,food.y-10);
snake.x[snake.node]=-20;snake.y[snake.node]=-20;
/*新的一节先放在看不见的位置,下次循环就取前一节的位置*/
snake.node++;/*蛇的身体长一节*/
food.yes=1;/*画面上需要出现新的食物*/
score+=10;
PrScore();/*输出新得分*/
}
setcolor(4);/*画出蛇*/
for(i=0;i<snake.node;i++)
rectangle(snake.x[i],snake.y[i],snake.x[i]+10,
snake.y[i]-10);
delay(gamespeed);
setcolor(0);/*用黑色去除蛇的的最后一节*/
rectangle(snake.x[snake.node-1],snake.y[snake.node-1],
snake.x[snake.node-1]+10,snake.y[snake.node-1]-10);
} /*endwhile（！kbhit）*/
if(snake.life==1)/*如果蛇死就跳出循环*/
break;
key=bioskey(0);/*接收按键*/
if(key==ESC)/*按ESC键退出*/
break;
else
if(key==UP&&snake.direction!=4)
/*判断是否往相反的方向移动*/
snake.direction=3;
else
if(key==RIGHT&&snake.direction!=2)
snake.direction=1;
else
if(key==LEFT&&snake.direction!=1)
snake.direction=2;
else
if(key==DOWN&&snake.direction!=3)
snake.direction=4;
}/*endwhile(1)*/
}
/*游戏结束*/
void GameOver(void)
{
cleardevice();
PrScore();
setcolor(RED);
settextstyle(0,0,4);
outtextxy(200,200,"GAME OVER");
getch();
}
/*输出成绩*/
void PrScore(void)
{
char str[10];
setfillstyle(SOLID_FILL,YELLOW);
bar(50,15,220,35);
setcolor(6);
settextstyle(0,0,2);
sprintf(str,"score:%d",score);
outtextxy(55,20,str);
}
/*图形结束*/
void Close(void)
{
getch();
closegraph();
}
❸ 跪求一贪吃蛇游戏 打包 源代码 java语言
#include <reg51.h>
#define uchar unsigned char
#define SNAKE 20 //最大长度
#define TIME 50 //显示延时时间
#define SPEED 71 //速度控制
//#define keyenable 1
sbit keyenable=P3^6; //方向使能
/*sbit keyx=P0^1; //左右
sbit keyy=P0^2; //上下 */
//sbit up=P0^0;
sbit up=P3^3; //down
sbit down=P3^1;
sbit right=P3^2;
sbit left=P3^4;
uchar x[SNAKE+1];
uchar y[SNAKE+1];
uchar time,n,i,e; //延时时间，当前蛇长，通用循环变量，当前速度
char addx,addy; //位移偏移量
/********************
延时程序
*********************/
void delay(char MS)
{
char us,usn;
while(MS!=0)
{
usn = 0;
while(usn!=0)
{
us=0xff;
while (us!=0){us--;};
usn--;
}
MS--;
}
}
/*******************************************
判断碰撞
*******************************************/
bit knock()
{bit k;
k=0;
if(x[1]>7||y[1]>7)k=1; //撞墙
for(i=2;i<n;i++)if((x[1]==x[i])&(y[1]==y[i]))k=1; //撞自己
return k;
}
/*****************
上下左右键位处理
*****************/
void turnkey()// interrupt 0 using 2
{//up=1;
if(keyenable)
{
if(left){addy=0;if(addx!=1)addx=-1; else addx=1;}
if(right){addy=0;if(addx!=-1)addx=1; else addx=-1;}
if(up){addx=0;if(addy!=-1)addy=1; else addy=-1;}
if(down){addx=0;if(addy!=1)addy=-1; else addy=1;}
/*if(keyy)
{addy=0; //左右
if(keyx)if(addx==-1)addx=-1; else addx=1; //左
else
if(addx==1)addx=1; else addx=-1; //右
}
else
{addx=0; //上下
if(keyx)if(addy==1)addy=1; else addy=-1; //下
else
if(addy==-1)addy=-1; else addy=1; //上
} */
}
}
/*****************
乘方程序
*****************/
uchar mux(uchar temp)
{
if(temp==7)return 128;
if(temp==6)return 64;
if(temp==5)return 32;
if(temp==4)return 16;
if(temp==3)return 8;
if(temp==2)return 4;
if(temp==1)return 2;
if(temp==0)return 1;
return 0;
}
/*****************
显示时钟 显示程序
*****************/
void timer0(uchar k)
{while(k--)
{for(i=0;i<SNAKE+1;i++)
{P2=mux(x[i]);P1=255-mux(y[i]);
turnkey(); //上下左右键位处理
delay(TIME); //显示延迟
P2=0x00;P1=0xff;
}}
}
/*****************
主程序
*****************/
void main(void)
{e=SPEED;
P0=0x00;
P1=0xff;
P2=0x00;
P3=0x00;
while(1)
{//if(keyenable==1){P1=0x00;P2=0xff;}else{P1=0xff;P2=0x00;}
for(i=3;i<SNAKE+1;i++)x[i]=100;for(i=3;i<SNAKE+1;i++)y[i]=100;//初始化
x[0]=4;y[0]=4; //果子
n=3; //蛇长 n=-1
x[1]=1;y[1]=0; //蛇头
x[2]=0;y[2]=0; //蛇尾1
addx=0;addy=0; //位移偏移
//k=1;
while(1){if(keyenable)break;timer0(1);}
while(1)
{timer0(e);
if(knock()){e=SPEED;break;} //判断碰撞
if((x[0]==x[1]+addx)&(y[0]==y[1]+addy)) //是否吃东西
{n++;
if(n==SNAKE+1)
{n=3;e=e-10;
for(i=3;i<SNAKE+1;i++)x[i]=100;
for(i=3;i<SNAKE+1;i++)y[i]=100;
}
x[0]=x[n-2];
y[0]=y[n-2];
}
for(i=n-1;i>1;i--){x[i]=x[i-1];y[i]=y[i-1];}
//x[n-1]=x[2];y[n-1]=y[2];
x[1]=x[2]+addx;y[1]=y[2]+addy; //移动
}
}
}
❹ 贪吃蛇游戏的源代码
？
贪吃蛇源码：
<!doctype html>
<html>
<body style='overflow:hidden'>
<canvas id="can" width="400" height="400" style="background:Black;display: block;margin:20px auto;"></canvas>
<script>
var sn = [ 42, 41 ], dz = 43, fx = 1, n, ctx = document.getElementById("can").getContext("2d");
function draw(t, c) {
ctx.fillStyle = c;
ctx.fillRect(t % 20 * 20 + 1, ~~(t / 20) * 20 + 1, 18, 18);
}
document.onkeydown = function(e) {
fx = sn[1] - sn[0] == (n = [ -1, -20, 1, 20 ][(e || event).keyCode - 37] || fx) ? fx : n
};
!function() {
sn.unshift(n = sn[0] + fx);
if (sn.indexOf(n, 1) > 0 || n<0||n>399 || fx == 1 && n % 20 == 0 || fx == -1 && n % 20 == 19)
return alert("GAME OVER");
draw(n, "Lime");
if (n == dz) {
while (sn.indexOf(dz = ~~(Math.random() * 400)) >= 0);
draw(dz, "Yellow");
} else
draw(sn.pop(), "Black");
setTimeout(arguments.callee, 130);
}();
</script>
</body>
</html>
❺ 求VC中贪吃蛇的源代码
#define N 200
#include <graphics.h>
#include <stdlib.h>
#include <dos.h>
#define LEFT 0x4b00
#define RIGHT 0x4d00
#define DOWN 0x5000
#define UP 0x4800
#define ESC 0x011b
int i,key;
int score=0;/*得分*/
int gamespeed=50000;/*游戏速度自己调整*/
struct Food
{
int x;/*食物的横坐标*/
int y;/*食物的纵坐标*/
int yes;/*判断是否要出现食物的变量*/
}food;/*食物的结构体*/
struct Snake
{
int x[N];
int y[N];
int node;/*蛇的节数*/
int direction;/*蛇移动方向*/
int life;/* 蛇的生命,0活着,1死亡*/
}snake;
void Init(void);/*图形驱动*/
void Close(void);/*图形结束*/
void DrawK(void);/*开始画面*/
void GameOver(void);/*结束游戏*/
void GamePlay(void);/*玩游戏具体过程*/
void PrScore(void);/*输出成绩*/
/*主函数*/
void main(void)
{
Init();/*图形驱动*/
DrawK();/*开始画面*/
GamePlay();/*玩游戏具体过程*/
Close();/*图形结束*/
}
/*图形驱动*/
void Init(void)
{
int gd=DETECT,gm;
initgraph(&gd,&gm,"c:\\tc");
cleardevice();
}
/*开始画面，左上角坐标为（50，40），右下角坐标为（610，460）的围墙*/
void DrawK(void)
{
/*setbkcolor(LIGHTGREEN);*/
setcolor(11);
setlinestyle(SOLID_LINE,0,THICK_WIDTH);/*设置线型*/
for(i=50;i<=600;i+=10)/*画围墙*/
{
rectangle(i,40,i+10,49); /*上边*/
rectangle(i,451,i+10,460);/*下边*/
}
for(i=40;i<=450;i+=10)
{
rectangle(50,i,59,i+10); /*左边*/
rectangle(601,i,610,i+10);/*右边*/
}
}
/*玩游戏具体过程*/
void GamePlay(void)
{
randomize();/*随机数发生器*/
food.yes=1;/*1表示需要出现新食物,0表示已经存在食物*/
snake.life=0;/*活着*/
snake.direction=1;/*方向往右*/
snake.x[0]=100;snake.y[0]=100;/*蛇头*/
snake.x[1]=110;snake.y[1]=100;
snake.node=2;/*节数*/
PrScore();/*输出得分*/
while(1)/*可以重复玩游戏,压ESC键结束*/
{
while(!kbhit())/*在没有按键的情况下,蛇自己移动身体*/
{
if(food.yes==1)/*需要出现新食物*/
{
food.x=rand()%400+60;
food.y=rand()%350+60;
while(food.x%10!=0)/*食物随机出现后必须让食物能够在整格内,这样才可以让蛇吃到*/
food.x++;
while(food.y%10!=0)
food.y++;
food.yes=0;/*画面上有食物了*/
}
if(food.yes==0)/*画面上有食物了就要显示*/
{
setcolor(GREEN);
rectangle(food.x,food.y,food.x+10,food.y-10);
}
for(i=snake.node-1;i>0;i--)/*蛇的每个环节往前移动,也就是贪吃蛇的关键算法*/
{
snake.x[i]=snake.x[i-1];
snake.y[i]=snake.y[i-1];
}
/*1,2,3,4表示右,左,上,下四个方向,通过这个判断来移动蛇头*/
switch(snake.direction)
{
case 1:snake.x[0]+=10;break;
case 2: snake.x[0]-=10;break;
case 3: snake.y[0]-=10;break;
case 4: snake.y[0]+=10;break;
}
for(i=3;i<snake.node;i++)/*从蛇的第四节开始判断是否撞到自己了，因为蛇头为两节，第三节不可能拐过来*/
{
if(snake.x[i]==snake.x[0]&&snake.y[i]==snake.y[0])
{
GameOver();/*显示失败*/
snake.life=1;
break;
}
}
if(snake.x[0]<55||snake.x[0]>595||snake.y[0]<55||
snake.y[0]>455)/*蛇是否撞到墙壁*/
{
GameOver();/*本次游戏结束*/
snake.life=1; /*蛇死*/
}
if(snake.life==1)/*以上两种判断以后,如果蛇死就跳出内循环，重新开始*/
break;
if(snake.x[0]==food.x&&snake.y[0]==food.y)/*吃到食物以后*/
{
setcolor(0);/*把画面上的食物东西去掉*/
rectangle(food.x,food.y,food.x+10,food.y-10);
snake.x[snake.node]=-20;snake.y[snake.node]=-20;
/*新的一节先放在看不见的位置,下次循环就取前一节的位置*/
snake.node++;/*蛇的身体长一节*/
food.yes=1;/*画面上需要出现新的食物*/
score+=10;
PrScore();/*输出新得分*/
}
setcolor(4);/*画出蛇*/
for(i=0;i<snake.node;i++)
rectangle(snake.x[i],snake.y[i],snake.x[i]+10,
snake.y[i]-10);
delay(gamespeed);
setcolor(0);/*用黑色去除蛇的的最后一节*/
rectangle(snake.x[snake.node-1],snake.y[snake.node-1],
snake.x[snake.node-1]+10,snake.y[snake.node-1]-10);
} /*endwhile（！kbhit）*/
if(snake.life==1)/*如果蛇死就跳出循环*/
break;
key=bioskey(0);/*接收按键*/
if(key==ESC)/*按ESC键退出*/
break;
else
if(key==UP&&snake.direction!=4)
/*判断是否往相反的方向移动*/
snake.direction=3;
else
if(key==RIGHT&&snake.direction!=2)
snake.direction=1;
else
if(key==LEFT&&snake.direction!=1)
snake.direction=2;
else
if(key==DOWN&&snake.direction!=3)
snake.direction=4;
}/*endwhile(1)*/
}
/*游戏结束*/
void GameOver(void)
{
cleardevice();
PrScore();
setcolor(RED);
settextstyle(0,0,4);
outtextxy(200,200,"GAME OVER");
getch();
}
/*输出成绩*/
void PrScore(void)
{
char str[10];
setfillstyle(SOLID_FILL,YELLOW);
bar(50,15,220,35);
setcolor(6);
settextstyle(0,0,2);
sprintf(str,"score:%d",score);
outtextxy(55,20,str);
}
/*图形结束*/
void Close(void)
{
getch();
closegraph();
}
❻ 求一段JAVA编写的贪吃蛇小程序源代码
用MVC方式实现的贪吃蛇游戏，共有4个类。运行GreedSnake运行即可。主要是观察者模式的使用，我已经添加了很多注释了。
1、
/*
* 程序名称：贪食蛇
* 原作者：BigF
* 修改者：algo
* 说明：我以前也用C写过这个程序，现在看到BigF用Java写的这个，发现虽然作者自称是Java的初学者，
* 但是明显编写程序的素养不错，程序结构写得很清晰，有些细微得地方也写得很简洁，一时兴起之
* 下，我认真解读了这个程序，发现数据和表现分开得很好，而我近日正在学习MVC设计模式，
* 因此尝试把程序得结构改了一下，用MVC模式来实现，对源程序得改动不多。
* 我同时也为程序增加了一些自己理解得注释，希望对大家阅读有帮助。
*/
package mvcTest;
/**
* @author WangYu
* @version 1.0
* Description:
* </pre>
* Create on :Date :2005-6-13 Time:15:57:16
* LastModified:
* History:
*/
public class GreedSnake {
public static void main(String[] args) {
SnakeModel model = new SnakeModel(20,30);
SnakeControl control = new SnakeControl(model);
SnakeView view = new SnakeView(model,control);
//添加一个观察者，让view成为model的观察者
model.addObserver(view);
(new Thread(model)).start();
}
}
-------------------------------------------------------------
2、
package mvcTest;
//SnakeControl.java
import java.awt.event.KeyEvent;
import java.awt.event.KeyListener;
/**
* MVC中的Controler，负责接收用户的操作，并把用户操作通知Model
*/
public class SnakeControl implements KeyListener{
SnakeModel model;
public SnakeControl(SnakeModel model){
this.model = model;
}
public void keyPressed(KeyEvent e) {
int keyCode = e.getKeyCode();
if (model.running){ // 运行状态下，处理的按键
switch (keyCode) {
case KeyEvent.VK_UP:
model.changeDirection(SnakeModel.UP);
break;
case KeyEvent.VK_DOWN:
model.changeDirection(SnakeModel.DOWN);
break;
case KeyEvent.VK_LEFT:
model.changeDirection(SnakeModel.LEFT);
break;
case KeyEvent.VK_RIGHT:
model.changeDirection(SnakeModel.RIGHT);
break;
case KeyEvent.VK_ADD:
case KeyEvent.VK_PAGE_UP:
model.speedUp();
break;
case KeyEvent.VK_SUBTRACT:
case KeyEvent.VK_PAGE_DOWN:
model.speedDown();
break;
case KeyEvent.VK_SPACE:
case KeyEvent.VK_P:
model.changePauseState();
break;
default:
}
}
// 任何情况下处理的按键，按键导致重新启动游戏
if (keyCode == KeyEvent.VK_R ||
keyCode == KeyEvent.VK_S ||
keyCode == KeyEvent.VK_ENTER) {
model.reset();
}
}
public void keyReleased(KeyEvent e) {
}
public void keyTyped(KeyEvent e) {
}
}
-------------------------------------------------------------
3、
/*
*
*/
package mvcTest;
/**
* 游戏的Model类，负责所有游戏相关数据及运行
* @author WangYu
* @version 1.0
* Description:
* </pre>
* Create on :Date :2005-6-13 Time:15:58:33
* LastModified:
* History:
*/
//SnakeModel.java
import javax.swing.*;
import java.util.Arrays;
import java.util.LinkedList;
import java.util.Observable;
import java.util.Random;
/**
* 游戏的Model类，负责所有游戏相关数据及运行
*/
class SnakeModel extends Observable implements Runnable {
boolean[][] matrix; // 指示位置上有没蛇体或食物
LinkedList nodeArray = new LinkedList(); // 蛇体
Node food;
int maxX;
int maxY;
int direction = 2; // 蛇运行的方向
boolean running = false; // 运行状态
int timeInterval = 200; // 时间间隔，毫秒
double speedChangeRate = 0.75; // 每次得速度变化率
boolean paused = false; // 暂停标志
int score = 0; // 得分
int countMove = 0; // 吃到食物前移动的次数
// UP and DOWN should be even
// RIGHT and LEFT should be odd
public static final int UP = 2;
public static final int DOWN = 4;
public static final int LEFT = 1;
public static final int RIGHT = 3;
public SnakeModel( int maxX, int maxY) {
this.maxX = maxX;
this.maxY = maxY;
reset();
}
public void reset(){
direction = SnakeModel.UP; // 蛇运行的方向
timeInterval = 200; // 时间间隔，毫秒
paused = false; // 暂停标志
score = 0; // 得分
countMove = 0; // 吃到食物前移动的次数
// initial matirx, 全部清0
matrix = new boolean[maxX][];
for (int i = 0; i < maxX; ++i) {
matrix[i] = new boolean[maxY];
Arrays.fill(matrix[i], false);
}
// initial the snake
// 初始化蛇体，如果横向位置超过20个，长度为10，否则为横向位置的一半
int initArrayLength = maxX > 20 ? 10 : maxX / 2;
nodeArray.clear();
for (int i = 0; i < initArrayLength; ++i) {
int x = maxX / 2 + i;//maxX被初始化为20
int y = maxY / 2; //maxY被初始化为30
//nodeArray[x,y]: [10,15]-[11,15]-[12，15]~~[20,15]
//默认的运行方向向上，所以游戏一开始nodeArray就变为：
// [10，14]-[10，15]-[11，15]-[12，15]~~[19，15]
nodeArray.addLast(new Node(x, y));
matrix[x][y] = true;
}
// 创建食物
food = createFood();
matrix[food.x][food.y] = true;
}
public void changeDirection(int newDirection) {
// 改变的方向不能与原来方向同向或反向
if (direction % 2 != newDirection % 2) {
direction = newDirection;
}
}
/**
* 运行一次
* @return
*/
public boolean moveOn() {
Node n = (Node) nodeArray.getFirst();
int x = n.x;
int y = n.y;
// 根据方向增减坐标值
switch (direction) {
case UP:
y--;
break;
case DOWN:
y++;
break;
case LEFT:
x--;
break;
case RIGHT:
x++;
break;
}
// 如果新坐标落在有效范围内，则进行处理
if ((0 <= x && x < maxX) && (0 <= y && y < maxY)) {
if (matrix[x][y]) { // 如果新坐标的点上有东西（蛇体或者食物）
if (x == food.x && y == food.y) { // 吃到食物，成功
nodeArray.addFirst(food); // 从蛇头赠长
// 分数规则，与移动改变方向的次数和速度两个元素有关
int scoreGet = (10000 - 200 * countMove) / timeInterval;
score += scoreGet > 0 ? scoreGet : 10;
countMove = 0;
food = createFood(); // 创建新的食物
matrix[food.x][food.y] = true; // 设置食物所在位置
return true;
} else // 吃到蛇体自身，失败
return false;
} else { // 如果新坐标的点上没有东西（蛇体），移动蛇体
nodeArray.addFirst(new Node(x, y));
matrix[x][y] = true;
n = (Node) nodeArray.removeLast();
matrix[n.x][n.y] = false;
countMove++;
return true;
}
}
return false; // 触到边线，失败
}
public void run() {
running = true;
while (running) {
try {
Thread.sleep(timeInterval);
} catch (Exception e) {
break;
}
if (!paused) {
if (moveOn()) {
setChanged(); // Model通知View数据已经更新
notifyObservers();
} else {
JOptionPane.showMessageDialog(null,
"you failed",
"Game Over",
JOptionPane.INFORMATION_MESSAGE);
break;
}
}
}
running = false;
}
private Node createFood() {
int x = 0;
int y = 0;
// 随机获取一个有效区域内的与蛇体和食物不重叠的位置
do {
Random r = new Random();
x = r.nextInt(maxX);
y = r.nextInt(maxY);
} while (matrix[x][y]);
return new Node(x, y);
}
public void speedUp() {
timeInterval *= speedChangeRate;
}
public void speedDown() {
timeInterval /= speedChangeRate;
}
public void changePauseState() {
paused = !paused;
}
public String toString() {
String result = "";
for (int i = 0; i < nodeArray.size(); ++i) {
Node n = (Node) nodeArray.get(i);
result += "[" + n.x + "," + n.y + "]";
}
return result;
}
}
class Node {
int x;
int y;
Node(int x, int y) {
this.x = x;
this.y = y;
}
}
------------------------------------------------------------
4、
package mvcTest;
//SnakeView.java
import javax.swing.*;
import java.awt.*;
import java.util.Iterator;
import java.util.LinkedList;
import java.util.Observable;
import java.util.Observer;
/**
* MVC模式中得Viewer，只负责对数据的显示,而不用理会游戏的控制逻辑
*/
public class SnakeView implements Observer {
SnakeControl control = null;
SnakeModel model = null;
JFrame mainFrame;
Canvas paintCanvas;
JLabel labelScore;
public static final int canvasWidth = 200;
public static final int canvasHeight = 300;
public static final int nodeWidth = 10;
public static final int nodeHeight = 10;
public SnakeView(SnakeModel model, SnakeControl control) {
this.model = model;
this.control = control;
mainFrame = new JFrame("GreedSnake");
Container cp = mainFrame.getContentPane();
// 创建顶部的分数显示
labelScore = new JLabel("Score:");
cp.add(labelScore, BorderLayout.NORTH);
// 创建中间的游戏显示区域
paintCanvas = new Canvas();
paintCanvas.setSize(canvasWidth + 1, canvasHeight + 1);
paintCanvas.addKeyListener(control);
cp.add(paintCanvas, BorderLayout.CENTER);
// 创建底下的帮助栏
JPanel panelButtom = new JPanel();
panelButtom.setLayout(new BorderLayout());
JLabel labelHelp;
labelHelp = new JLabel("PageUp, PageDown for speed;", JLabel.CENTER);
panelButtom.add(labelHelp, BorderLayout.NORTH);
labelHelp = new JLabel("ENTER or R or S for start;", JLabel.CENTER);
panelButtom.add(labelHelp, BorderLayout.CENTER);
labelHelp = new JLabel("SPACE or P for pause", JLabel.CENTER);
panelButtom.add(labelHelp, BorderLayout.SOUTH);
cp.add(panelButtom, BorderLayout.SOUTH);
mainFrame.addKeyListener(control);
mainFrame.pack();
mainFrame.setResizable(false);
mainFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
mainFrame.setVisible(true);
}
void repaint() {
Graphics g = paintCanvas.getGraphics();
//draw background
g.setColor(Color.WHITE);
g.fillRect(0, 0, canvasWidth, canvasHeight);
// draw the snake
g.setColor(Color.BLACK);
LinkedList na = model.nodeArray;
Iterator it = na.iterator();
while (it.hasNext()) {
Node n = (Node) it.next();
drawNode(g, n);
}
// draw the food
g.setColor(Color.RED);
Node n = model.food;
drawNode(g, n);
updateScore();
}
private void drawNode(Graphics g, Node n) {
g.fillRect(n.x * nodeWidth,
n.y * nodeHeight,
nodeWidth - 1,
nodeHeight - 1);
}
public void updateScore() {
String s = "Score: " + model.score;
labelScore.setText(s);
}
public void update(Observable o, Object arg) {
repaint();
}
}
希望采纳
❼ C语言的贪吃蛇源代码
#include <bits/stdc++.h>
#include <windows.h>
#include <conio.h>
using namespace std;
void gotoxy(int x,int y) {COORD pos={x,y}; SetConsoleCursorPosition(GetStdHandle(STD_OUTPUT_HANDLE),pos);}//光标定位
class Food {//食物类
private: int m_x; int m_y;
public:
void randfood() {//随机产生一个食物
srand((int)time(NULL));//利用时间添加随机数种子，需要ctime头文件
L1:{m_x=rand()%(85)+2;//2~86
m_y=rand()%(25)+2;//2~26
if(m_x%2) goto L1;//如果食物的x坐标不是偶数则重新确定食物的坐标
gotoxy(m_x,m_y);//在确认好的位置输出食物
cout << "★";}}
int getFoodm_x() {return m_x;}//返回食物的x坐标
int getFoodm_y() {return m_y;}};//返回食物的y坐标
class Snake {
private:
struct Snakecoor {int x; int y;};//定义一个蛇的坐标机构
vector<Snakecoor> snakecoor;//将坐标存入vector容器中
//判断并改变前进方向的函数
void degdir(Snakecoor&nexthead) {//定义新的蛇头变量
static char key='d';//静态变量防止改变移动方向后重新改回来
if(_kbhit()) {
char temp=_getch();//定义一个临时变量储存键盘输入的值
switch(temp) {//如果临时变量的值为wasd中的一个，则赋值给key
default: break;//default是缺省情况，只有任何条件都不匹配的情况下才会执行 必须写在前面！不然蛇无法转向
case'w': case'a': case's': case'd':
//如果temp的方向和key的方向不相反则赋值 因为两次移动方向不能相反 将蛇设置为初始向右走
if(key=='w' && temp!='s' || key=='s' && temp!='w' || key=='a' && temp!='d' || key=='d' && temp!='a') key=temp;}}
switch (key) {//根据key的值来确定蛇的移动方向
case'd': nexthead.x=snakecoor.front().x+2; nexthead.y=snakecoor.front().y; break;
//新的蛇头的头部等于容器内第一个数据(旧蛇头)x坐标+2 因为蛇头占两个坐标，移动一次加2
case'a': nexthead.x=snakecoor.front().x-2; nexthead.y=snakecoor.front().y; break;
case'w': nexthead.x=snakecoor.front().x; nexthead.y=snakecoor.front().y-1; break;
//因为控制台的x长度是y的一半，所以用两个x做蛇头，需要的坐标是二倍
case's': nexthead.x=snakecoor.front().x; nexthead.y=snakecoor.front().y+1;}}
//游戏结束时设计一个界面输出“游戏结束”以及分数
void finmatt(const int score) {
system("cls"); gotoxy(40, 14);//清屏然后输出
cout << "游戏结束"; gotoxy(40, 16);
cout << "得分：" << score; gotoxy(0, 26);
exit(0);}//exit为C++的退出函数 exit(0)表示程序正常退出，非0表示非正常退出
void finishgame(const int score) {//游戏结束
if(snakecoor[0].x>=88 || snakecoor[0].x<0 || snakecoor[0].y>=28 || snakecoor[0].y<0) finmatt(score);//撞墙
for(int i=1;i<snakecoor.size();i++) if(snakecoor[0].x==snakecoor[i].x && snakecoor[0].y==snakecoor[i].y) finmatt(score);}//撞到自身
public://构造初始化蛇的位置
Snake() { Snakecoor temp;//临时结构变量用于创建蛇
for(int i=5;i>=0;i--) {//反向创建初始蛇身，初始蛇头朝右
temp.x=16+(i<<1); temp.y=8;//偶数 在蛇头左移生成蛇身
snakecoor.push_back(temp);}}//在蛇尾尾插入临时变量
void move(Food&food, int& score) {//蛇运动的函数
Snakecoor nexthead;//新蛇头变量
degdir(nexthead);//判断和改变蛇前进的方向
snakecoor.insert(snakecoor.begin(), nexthead);//将蛇头插入容器的头部
gotoxy(0, 0); cout << "得分：" << score;//每次移动都在左上角刷新得分
gotoxy(0, 2); cout << "蛇的长度为：" << snakecoor.size();//长度用来测试
finishgame(score);//判断游戏结束，输出分数
//吃到食物蛇的变化
if(snakecoor[0].x==food.getFoodm_x() && snakecoor[0].y==food.getFoodm_y()) {//蛇头与食物重合
gotoxy(snakecoor[0].x, snakecoor[0].y); cout << "●";//吃到食物时这次蛇没有移动，所以蛇会卡顿一下
gotoxy(snakecoor[1].x, snakecoor[1].y); cout << "■";//重新输出一下蛇头和第一节蛇身让蛇不卡顿
score++; food.randfood(); return;}//吃到食物得分+1,如果蛇头坐标和食物坐标重合则重新产生一个食物并直接结束本次移动
for(int i=0;i<snakecoor.size();i++) {//遍历容器，判断食物与蛇身是否重合并输出整条蛇
gotoxy(snakecoor[i].x, snakecoor[i].y);
if (!i) cout << "●"; else cout << "■";//头部输出圆形否则输出方块
if (snakecoor[i].x==food.getFoodm_x() && snakecoor[i].y==food.getFoodm_y())food.randfood();}//如果食物刷新到了蛇身上，则重新产生一个
gotoxy(snakecoor.back().x,snakecoor.back().y);cout << " ";snakecoor.pop_back();}};
//数据与画面是分开，的在容器尾部的地方输出空格 清除画面上的蛇尾，删除容器中最后一个数据 清除数据上的蛇尾
void HideCursor() {CONSOLE_CURSOR_INFO cursor_info={1,0};SetConsoleCursorInfo(GetStdHandle(STD_OUTPUT_HANDLE),&cursor_info);}//隐藏光标
int main() {system("mode con cols=88 lines=28"); system("title 贪吃蛇"); HideCursor();//光标隐藏，设置控制台窗口大小、标题
int score=0; Food food; food.randfood(); Snake snake;//得分变量，食物对象，开局随机产生一个食物，蛇对象
while(true) {snake.move(food, score);Sleep(150);}return 0;}//蛇移动,游戏速度
❽ 求大神给一份android studio的贪吃蛇游戏的源代码
请问你的源代码还在吗？