linux查看usb

❶ 请教，linux怎样查看usb设备的详细信息

方法一：在/etc/init.d/rcS中添加mount -t usbfs none /proc/bus/usb.
方法二：在终端中输入mount -t usbfs /proc/bus/usb /proc/bus/usb.
前提是在编译内核时选中usb device filesystem。
#cat /proc/bus/usb /device
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 2.06
S: Manufacturer=Linux 2.6.32.2-ltls ohci_hcd
S: Proct=S3C24XX OHCI
S: SerialNumber=s3c24xx
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 1.25
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=160a ProdID=3184 Rev= 2.05
S: Manufacturer=VIA Networking Technologies, Inc.
S: Proct=VNT USB-802.11 Wireless LAN Adapter
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=vntwusb
E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

❷ 在linux操作系统中怎样读取u盘

1、首先需要把U盘插入Linux电脑，确保U盘指示灯是亮着的进入Linux系统主界面，按Ctrl+Alt+T打开命令窗口。

❸ 在linux下 如何找到 插入的USB设备所对应的设备文件呢

插入USB设备后，我的设备是U盘。fdisk -l查看u盘设备在哪个分区，比如是/dev/sdb 然后挂载这个分区到/mnt目录下就可以访问该U盘设备了 。其他的USB设备没用过。

❹ 在linux系统里，如何检查新插入的USB设备是否被系统识别

1、在linux系统里，如何检查新插入的USB设备是否被系统识别？
答：在linux图形状态下（就是进入图形桌面）有两个办法：一、当插入usb设备时，桌面会跳出一个硬盘图标。二、在插入usb前console（命令行）下键入：df，插入usb后再键入：df，看看有没有新盘符出现。
2、在linux系统里，使作fdisk和命令需要注意什么？
答：fdisk是分区命令，需要有计划和谨慎行事，存盘前最好再确认一下。
3、在linux系统里，使用umount命令需要注意什么问题？
答：umount是硬盘卸载命令，当有进程在使用umount指定的卸载盘时，会出错，因此运行前确认没有进程使用要卸载的盘。

❺ 如何在linux下读写usb设备的数据

Linux不直接支持NTFS文件系统，如果U盘是NTFS文件系统就无法直接挂载使用。首先用lsblk列出所有块设备：
1
lsblk
sd表示SCSI磁盘，后面跟a，b，c之类的字母表示第几个磁盘，字母之后再跟数字表示这个磁盘的第几个分区。大部分人只有一个硬盘，此时再接一个U盘，这个U盘就是sdb，U盘上的分区就是sdb1。除此以外，还可以根据显示的容量判断U盘设备名是sdb还是sdc。其他情况以此类推。
然后可以在用户目录创建一个usb目录：（也可以根据喜好设置在其他地方，下面的挂载地址跟着改变即可）
1
mkdir ~/usb1
最后把U盘分区挂载到这个目录即可：（可能会提示输入密码，输入密码后回车即可）
1
sudo mount /dev/sdb1 ~/usb1
然后就可以通过访问 ~/usb1目录来访问U盘：
1
2
cd ~/usb1
ls

最后要拔出U盘以前，要卸载U盘：（卸载时要退出usb1目录，不然无法卸载）（可能会提示输入密码，输入密码后回车即可）

❻ 怎么查看linux usb设备驱动

下面的信息都是在VMware中运行Ubuntu12-04系统上执行的。同样该命令也支持在嵌入式系统中进行USB调试。
一、cat设备节点获取信息
在一些嵌入式开发中需要调试USB功能，经常会cat /sys 下的相关设备节点来查看某些信息，比如说我们可以看到 /sys/bus/usb/devices 目录有多个子目录。进入到某个子目录可以看到usb设备更加详细的信息(可以理解为设备描述符)。
1、usb设备在总线上的信息
// usb设备在总线上的信息
root@ubuntu:/sys/kernel/debug# cd /sys/bus/usb/devices
root@ubuntu:/sys/bus/usb/devices# ll
total 0
drwxr-xr-x 2 root root 0 Nov 26 21:21 ./
drwxr-xr-x 4 root root 0 Nov 26 21:21 ../
lrwxrwxrwx 1 root root 0 Nov 26 21:21 1-0:1.0 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-0:1.0/
lrwxrwxrwx 1 root root 0 Dec 15 23:10 1-1 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/
lrwxrwxrwx 1 root root 0 Dec 15 23:18 1-1:1.0 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/
lrwxrwxrwx 1 root root 0 Nov 26 21:21 2-0:1.0 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-0:1.0/
lrwxrwxrwx 1 root root 0 Nov 26 21:21 2-1 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/
lrwxrwxrwx 1 root root 0 Nov 26 21:21 2-1:1.0 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/2-1:1.0/
lrwxrwxrwx 1 root root 0 Nov 26 21:21 2-2 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-2/
lrwxrwxrwx 1 root root 0 Nov 26 21:21 2-2:1.0 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-2/2-2:1.0/
lrwxrwxrwx 1 root root 0 Nov 26 21:21 usb1 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/
lrwxrwxrwx 1 root root 0 Nov 26 21:21 usb2 -> ../../../devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/
其中 usbx/第x个总线，x-y:a.b/的目录格式，x表示总线号，y表示端口，a表示配置，b表示接口。
具体解释可以参照如下：
The names that begin with "usb" refer to USB controllers. More accurately, they refer to the "root hub" associated with each controller. The number is the USB bus number. In the example there is only one controller, so its bus is number 1. Hence the name "usb1".
"1-0:1.0" is a special case. It refers to the root hub's interface. This acts just like the interface in an actual hub an almost every respect; see below.
All the other entries refer to genuine USB devices and their interfaces. The devices are named by a scheme like this:
bus-port.port.port ...
In other words, the name starts with the bus number followed by a '-'. Then comes the sequence of port numbers for each of the intermediate hubs along the path to the device.
For example, "1-1" is a device plugged into bus 1, port 1. It happens to be a hub, and "1-1.3" is the device plugged into port 3 of that hub. That device is another hub, and "1-1.3.1" is the device plugged into its port 1.
The interfaces are indicated by suffixes having this form:
:config.interface
That is, a ':' followed by the configuration number followed by '.' followed by the interface number. In the above example, each of the devices is using configuration 1 and this configuration has only a single interface, number 0. So the interfaces show up as;
1-1:1.0 1-1.3:1.0 1-1.3.1:1.0
A hub will never have more than a single interface; that's part of the USB spec. But other devices can and do have multiple interfaces (and sometimes multiple configurations). Each interface gets its own entry in sysfs and can have its own driver.
2、特定设备的详细信息
进入到某个目录中去，可以看到该设备的详细信息，可用cat命令获取信息。
// usb设备的详细信息
root@ubuntu:/sys/bus/usb/devices/usb1# ll
total 0
drwxr-xr-x 6 root root 0 Nov 26 21:21 ./
drwxr-xr-x 4 root root 0 Nov 26 21:21 ../
drwxr-xr-x 10 root root 0 Nov 26 21:21 1-0:1.0/
drwxr-xr-x 5 root root 0 Dec 15 23:10 1-1/
-rw-r--r-- 1 root root 4096 Dec 15 23:40 authorized
-rw-r--r-- 1 root root 4096 Dec 15 23:40 authorized_default
-rw-r--r-- 1 root root 4096 Dec 15 23:40 avoid_reset_quirk
-r--r--r-- 1 root root 4096 Nov 26 21:21 bcdDevice
-rw-r--r-- 1 root root 4096 Nov 26 21:21 bConfigurationValue
-r--r--r-- 1 root root 4096 Nov 26 21:21 bDeviceClass
-r--r--r-- 1 root root 4096 Nov 26 21:21 bDeviceProtocol
-r--r--r-- 1 root root 4096 Nov 26 21:21 bDeviceSubClass
-r--r--r-- 1 root root 4096 Dec 15 23:40 bmAttributes
-r--r--r-- 1 root root 4096 Dec 15 23:40 bMaxPacketSize0
-r--r--r-- 1 root root 4096 Dec 15 23:40 bMaxPower
-r--r--r-- 1 root root 4096 Dec 15 23:40 bNumConfigurations
-r--r--r-- 1 root root 4096 Dec 15 23:40 bNumInterfaces
-r--r--r-- 1 root root 4096 Nov 26 21:21 busnum
-r--r--r-- 1 root root 4096 Dec 15 23:40 configuration
-r--r--r-- 1 root root 65553 Nov 26 21:21 descriptors
-r--r--r-- 1 root root 4096 Dec 15 23:40 dev
-r--r--r-- 1 root root 4096 Nov 26 21:21 devnum
-r--r--r-- 1 root root 4096 Dec 15 23:40 devpath
lrwxrwxrwx 1 root root 0 Nov 27 20:06 driver -> ../../../../../bus/usb/drivers/usb/
drwxr-xr-x 3 root root 0 Dec 15 23:40 ep_00/
-r--r--r-- 1 root root 4096 Nov 26 21:21 idProct
-r--r--r-- 1 root root 4096 Nov 26 21:21 idVendor
-r--r--r-- 1 root root 4096 Dec 15 23:40 ltm_capable
-r--r--r-- 1 root root 4096 Nov 26 21:21 manufacturer
-r--r--r-- 1 root root 4096 Dec 15 23:40 maxchild
drwxr-xr-x 2 root root 0 Nov 26 21:21 power/
-r--r--r-- 1 root root 4096 Nov 26 21:21 proct
-r--r--r-- 1 root root 4096 Dec 15 23:40 quirks
-r--r--r-- 1 root root 4096 Nov 26 21:21 removable
--w------- 1 root root 4096 Dec 15 23:40 remove
-r--r--r-- 1 root root 4096 Nov 26 21:21 serial
-r--r--r-- 1 root root 4096 Nov 26 21:21 speed
lrwxrwxrwx 1 root root 0 Nov 26 21:21 subsystem -> ../../../../../bus/usb/
-rw-r--r-- 1 root root 4096 Nov 26 21:21 uevent
-r--r--r-- 1 root root 4096 Dec 15 23:40 urbnum
-r--r--r-- 1 root root 4096 Dec 15 23:40 version
二、使用debugfs
1、挂载 debugfs 到 /sys/kernel/debug 路径下
root@ubuntu:mount -t debugfs none /sys/kernel/debug
2、执行上述步骤之后，在 /sys/kernel/debug 就会生成如下的文件
root@ubuntu:/sys/bus/usb/devices# cd /sys/kernel/debug/
root@ubuntu:/sys/kernel/debug# ll
total 0
drwx------ 22 root root 0 Nov 26 21:21 ./
drwxr-xr-x 7 root root 0 Nov 26 21:21 ../
drwxr-xr-x 2 root root 0 Nov 26 21:21 acpi/
drwxr-xr-x 32 root root 0 Dec 4 16:30 bdi/
drwxr-xr-x 2 root root 0 Nov 26 21:21 bluetooth/
drwxr-xr-x 2 root root 0 Nov 26 21:21 cleancache/
drwxr-xr-x 2 root root 0 Nov 26 21:21 dma_buf/
drwxr-xr-x 4 root root 0 Nov 26 21:21 dri/
drwxr-xr-x 2 root root 0 Nov 26 21:21 dynamic_debug/
drwxr-xr-x 2 root root 0 Nov 26 21:21 extfrag/
drwxr-xr-x 2 root root 0 Nov 26 21:21 frontswap/
-r--r--r-- 1 root root 0 Nov 26 21:21 gpio
drwxr-xr-x 3 root root 0 Nov 26 21:21 hid/
drwxr-xr-x 2 root root 0 Nov 26 21:21 kprobes/
drwxr-xr-x 3 root root 0 Nov 26 21:21 kvm-guest/
drwxr-xr-x 2 root root 0 Nov 26 21:21 mce/
drwxr-xr-x 2 root root 0 Nov 26 21:21 pinctrl/
-r--r--r-- 1 root root 0 Nov 26 21:21 pwm
drwxr-xr-x 2 root root 0 Nov 26 21:21 regmap/
drwxr-xr-x 3 root root 0 Nov 26 21:21 regulator/
-rw-r--r-- 1 root root 0 Nov 26 21:21 sched_features
-r--r--r-- 1 root root 0 Nov 26 21:21 sleep_time
-r--r--r-- 1 root root 0 Nov 26 21:21 suspend_stats
drwxr-xr-x 7 root root 0 Nov 26 21:21 tracing/
drwxr-xr-x 3 root root 0 Nov 26 21:21 usb/
drwxr-xr-x 2 root root 0 Nov 26 21:21 virtio-ports/
-r--r--r-- 1 root root 0 Nov 26 21:21 vmmemctl
-r--r--r-- 1 root root 0 Nov 26 21:21 wakeup_sources
drwxr-xr-x 2 root root 0 Nov 26 21:21 x86/
3、cat 设备节点
执行下述命令之后会以特定格式打印目前USB总线上所有USB设备的信息如下：
root@ubuntu:/sys/kernel/debug# cat usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 3.13
S: Manufacturer=Linux 3.13.0-32-generic uhci_hcd
S: Proct=UHCI Host Controller
S: SerialNumber=0000:02:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0e0f ProdID=0003 Rev= 1.03
S: Manufacturer=VMware
S: Proct=VMware Virtual USB Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 7
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0e0f ProdID=0002 Rev= 1.00
S: Proct=VMware Virtual USB Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.13
S: Manufacturer=Linux 3.13.0-32-generic ehci_hcd
S: Proct=EHCI Host Controller
S: SerialNumber=0000:02:03.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=0129 Rev=39.60
S: Manufacturer=Generic
S: Proct=USB2.0-CRW
S: SerialNumber=20100201396000000
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=50 Driver=rts5139
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 3 Ivl=64ms
至于信息的详细解析可以参照 Linux源代码中 Documentation/usb/proc_usb_info.txt 文件。现摘录其中对该格式的详细解释：

| | |__Proct ID code
| |__Vendor ID code
|__Device info tag #2

String descriptor info:
S: Manufacturer=ssss
| |__Manufacturer of this device as read from the device.
| For USB host controller drivers (virtual root hubs) this may
| be omitted, or (for newer drivers) will identify the kernel
| version and the driver which provi

❼ linux 如何判断usb驱动是2.0

看设备信息。
lsusb 可以看到系统中的usb设备信息。
lsusb -v 具体输出。里面的bcdUSB是usb的版本号。
0x0110是usb1.1
0x0200是usb2.0
在初始化过程中，除了F2812自身初始化外，还要完成对ISP1581各个端点使用的传输类型、传输包大小和中断类型及方式等设备任务。F2812对 ISP1581的操作是通过写/读寄存器来实现的。初始化结束后，通过设置ISP1581方式寄存器中的软件连接位（SOFTCT）可使外设连接到USB 总线上。《Linux就该这么学》一起学更多linux知识。
主机检测到有设备连接后会进行总线复位。在此期间，ISP1581将发送高速（HS）模式检测信号来判断主控制器支持的是USB2.0还是 USB1.1规范，若接收到一个高速（HS）握手信号，则表明有一个HS主机与总线相连，此此ISP1581将转换到高速（HS）状态，否则仍工作在全速（FS）状态。