gcc优化编译

1. MinGW（GCC）编译时的优化参数是什么

release版本通常使用-O2,debug使用-O0，参考Man手册和GNU说明文档

2. gcc 编译优化做了哪些事求解答

用过gcc的都应该知道编译时候的-O选项吧。它就是负责编译优化。下面列出它的说明： -O -O1 Optimize. Optimizing compilation takes somewhat more time, and a lot more memory for a large function. With -O, the compiler tries to rece code size and execution time, without performing any optimizations that take a great deal of compilation time. -O turns on the following optimization flags: -fdefer-pop -fdelayed-branch -fguess-branch-probability -fcprop-registers -floop-optimize -fif-conversion -fif-conver- sion2 -ftree-ccp -ftree-dce -ftree-dominator-opts -ftree-dse -ftree-ter -ftree-lrs -ftree-sra -ftree-rename -ftree-fre -ftree-ch -funit-at-a-time -fmerge-constants -O also turns on -fomit-frame-pointer on machines where doing so does not interfere with debugging. -O doesn’t turn on -ftree-sra for the Ada compiler. This option must be explicitly speci- fied on the command line to be enabled for the Ada compiler. -O2 Optimize even more. GCC performs nearly all supported optimizations that do not involve a space-speed tradeoff. The compiler does not perform loop unrolling or function inlining when you specify -O2. As compared to -O, this option increases both compilation time and the performance of the generated code. -O2 turns on all optimization flags specified by -O. It also turns on the following opti- mization flags: -fthread-jumps -fcrossjumping -foptimize-sibling-calls -fcse-follow-jumps -fcse-skip-blocks -fgcse -fgcse-lm -fexpensive-optimizations -fstrength-rece -fre- run-cse-after-loop -frerun-loop-opt -fcaller-saves -fpeephole2 -fschele-insns -fsched- ule-insns2 -fsched-interblock -fsched-spec -fregmove -fstrict-aliasing -fdelete-null-pointer-checks -freorder-blocks -freorder-functions -falign-functions -falign-jumps -falign-loops -falign-labels -ftree-vrp -ftree-pre Please note the warning under -fgcse about invoking -O2 on programs that use computed gotos. -O3 Optimize yet more. -O3 turns on all optimizations specified by -O2 and also turns on the -finline-functions, -funswitch-loops and -fgcse-after-reload options. -O0 Do not optimize. This is the default. -Os Optimize for size. -Os enables all -O2 optimizations that do not typically increase code size. It also performs further optimizations designed to rece code size. -Os disables the following optimization flags: -falign-functions -falign-jumps -falign-loops -falign-labels -freorder-blocks -freorder-blocks-and-partition -fprefetch-loop-arrays -ftree-vect-loop-version If you use multiple -O options, with or without level numbers, the last such option is the one that is effective. Options of the form -fflag specify machine-independent flags. Most flags have both positive and negative forms; the negative form of -ffoo would be -fno-foo. In the table below, only one of the forms is listed---the one you typically will use. You can figure out the other form by either removing no- or adding it. The following options control specific optimizations. They are either activated by -O options or are related to ones that are. You can use the following flags in the rare cases when "fine-tuning" of optimizations to be performed is desired. -fno-default-inline Do not make member functions inline by default merely because they are defined inside the class scope (C++ only). Otherwise, when you specify -O, member functions defined inside class scope are compiled inline by default; i.e., you don’t need to add inline in front of the member function name. -fno-defer-pop Always pop the arguments to each function call as soon as that function returns. For machines which must pop arguments after a function call, the compiler normally lets argu- ments accumulate on the stack for several function calls and pops them all at once. Disabled at levels -O, -O2, -O3, -Os. -fforce-mem Force memory operands to be copied into registers before doing arithmetic on them. This proces better code by making all memory references potential common subexpressions. When they are not common subexpressions, instruction combination should eliminate the separate register-load. This option is now a nop and will be removed in 4.2. -fforce-addr Force memory address constants to be copied into registers before doing arithmetic on them. -fomit-frame-pointer Don’t keep the frame pointer in a register for functions that don’t need one. This avoids the instructions to save, set up and restore frame pointers; it also makes an extra regis- ter available in many functions. It also makes debugging impossible on some machines. On some machines, such as the VAX, this flag has no effect, because the standard calling sequence automatically handles the frame pointer and nothing is saved by pretending it doesn’t exist. The machine-description macro "FRAME_POINTER_REQUIRED" controls whether a target machine supports this flag. Enabled at levels -O, -O2, -O3, -Os. -foptimize-sibling-calls Optimize sibling and tail recursive calls. Enabled at levels -O2, -O3, -Os. -fno-inline Don’t pay attention to the "inline" keyword. Normally this option is used to keep the com- piler from expanding any functions inline. Note that if you are not optimizing, no func- tions can be expanded inline. -finline-functions Integrate all simple functions into their callers. The compiler heuristically decides which functions are simple enough to be worth integrating in this way. If all calls to a given function are integrated, and the function is declared "static", then the function is normally not output as assembler code in its own right. Enabled at level -O3. -finline-functions-called-once Consider all "static" functions called once for inlining into their caller even if they are not marked "inline". If a call to a given function is integrated, then the function is not output as assembler code in its own right. Enabled if -funit-at-a-time is enabled. -fearly-inlining Inline functions marked by "always_inline" and functions whose body seems smaller than the function call overhead early before doing -fprofile-generate instrumentation and real inlining pass. Doing so makes profiling significantly cheaper and usually inlining faster on programs having large chains of nested wrapper functions. Enabled by default. -finline-limit=n By default, GCC limits the size of functions that can be inlined. This flag allows the control of this limit for functions that are explicitly marked as inline (i.e., marked with the inline keyword or defined within the class definition in c++). n is the size of func- tions that can be inlined in number of pseudo instructions (not counting parameter han- dling). The default value of n is 600. Increasing this value can result in more inlined code at the cost of compilation time and memory consumption. Decreasing usually makes the compilation faster and less code will be inlined (which presumably means slower programs). This option is particularly useful for programs that use inlining heavily such as those based on recursive templates with C++. Inlining is actually controlled by a number of parameters, which may be specified indivi- ally by using --param name=value. The -finline-limit=n option sets some of these parame- ters as follows: max-inline-insns-single is set to I<n>/2. max-inline-insns-auto is set to I<n>/2. min-inline-insns is set to 130 or I<n>/4, whichever is smaller. max-inline-insns-rtl is set to I<n>. See below for a documentation of the indivial parameters controlling inlining. Note: pseudo instruction represents, in this particular context, an abstract measurement of function’s size. In no way does it represent a count of assembly instructions and as such its exact meaning might change from one release to an another. -fkeep-inline-functions In C, emit "static" functions that are declared "inline" into the object file, even if the function has been inlined into all of its callers. This switch does not affect functions using the "extern inline" extension in GNU C. In C++, emit any and all inline functions into the object file. -fkeep-static-consts Emit variables declared "static const" when optimization isn’t turned on, even if the vari- ables aren’t referenced. GCC enables this option by default. If you want to force the compiler to check if the variable was referenced, regardless of whether or not optimization is turned on, use the -fno-keep-static-consts option. -fmerge-constants Attempt to merge identical constants (string constants and floating point constants) across compilation units. This option is the default for optimized compilation if the assembler and linker support it. Use -fno-merge-constants to inhibit this behavior. Enabled at levels -O, -O2, -O3, -Os. -fmerge-all-constants Attempt to merge identical constants and identical variables. This option implies -fmerge-constants. In addition to -fmerge-constants this considers e.g. even constant initialized arrays or initialized constant variables with integral or floating point types. Languages like C or C++ require each non-automatic variable to have distinct location, so using this option will result in non-conforming behavior. -fmolo-sched Perform swing molo scheling immediately before the first scheling pass. This pass looks at innermost loops and reorders their instructions by overlapping different itera- tions. -fno-branch-count-reg Do not use "decrement and branch" instructions on a count register, but instead generate a sequence of instructions that decrement a register, compare it against zero, then branch based upon the result. This option is only meaningful on architectures that support such instructions, which include x86, PowerPC, IA-64 and S/390. The default is -fbranch-count-reg, enabled when -fstrength-rece is enabled. -fno-function-cse Do not put function addresses in registers; make each instruction that calls a constant function contain the function’s address explicitly. This option results in less efficient code, but some strange hacks that alter the assembler output may be confused by the optimizations performed when this option is not used. The default is -ffunction-cse -fno-zero-initialized-in-bss If the target supports a BSS section, GCC by default puts variables that are initialized to zero into BSS. This can save space in the resulting code. This option turns off this behavior because some programs explicitly rely on variables going to the data section. E.g., so that the resulting executable can find the beginning of that section and/or make assumptions based on that. The default is -fzero-initialized-in-bss. -fmudflap -fmudflapth -fmudflapir For front-ends that support it (C and C++), instrument all risky pointer/array dereferenc- ing operations, some standard library string/heap functions, and some other associated con- structs with range/validity tests. Moles so instrumented should be immune to buffer overflows, invalid heap use, and some other classes of C/C++ programming errors. The instrumentation relies on a separate runtime library (libmudflap), which will be linked into a program if -fmudflap is given at link time. Run-time behavior of the instrumented program is controlled by the MUDFLAP_OPTIONS environment variable. See "env MUD- FLAP_OPTIONS=-help a.out" for its options. Use -fmudflapth instead of -fmudflap to compile and to link if your program is multi-threaded. Use -fmudflapir, in addition to -fmudflap or -fmudflapth, if instrumenta- tion should ignore pointer reads. This proces less instrumentation (and therefore faster execution) and still provides some protection against outright memory corrupting writes, but allows erroneously read data to propagate within a program. -fstrength-rece Perform the optimizations of loop strength rection and elimination of iteration vari- ables. Enabled at levels -O2, -O3, -Os. -fthread-jumps Perform optimizations where we check to see if a jump branches to a location where another comparison subsumed by the first is found. If so, the first branch is redirected to either the destination of the second branch or a point immediately following it, depending on whether the condition is known to be true or false. Enabled at levels -O2, -O3, -Os. -fcse-follow-jumps In common subexpression elimination, scan through jump instructions when the target of the jump is not reached by any other path. For example, when CSE encounters an "if" statement with an "else" clause, CSE will follow the jump when the condition tested is false. Enabled at levels -O2, -O3, -Os. -fcse-skip-blocks This is similar to -fcse-follow-jumps, but causes CSE to follow jumps which conditionally skip over blocks. When CSE encounters a simple "if" statement with no else clause, -fcse-skip-blocks causes CSE to follow the jump around the body of the "if". Enabled at levels -O2, -O3, -Os. -frerun-cse-after-loop Re-run common subexpression elimination after loop optimizations has been performed. Enabled at levels -O2, -O3, -Os. -frerun-loop-opt Run the loop optimizer twice. Enabled at levels -O2, -O3, -Os. -fgcse Perform a global common subexpression elimination pass. This pass also performs global constant and propagation. Note: When compiling a program using computed gotos, a GCC extension, you may get better runtime performance if you disable the global common subexpression elimination pass by adding -fno-gcse to the command line. Enabled at levels -O2, -O3, -Os. -fgcse-lm When -fgcse-lm is enabled, global common subexpression elimination will attempt to move loads which are only killed by stores into themselves. This allows a loop containing a load/store sequence to be changed to a load outside the loop, and a /store within the loop. Enabled by default when gcse is enabled. -fgcse-sm When -fgcse-sm is enabled, a store motion pass is run after global common subexpression elimination. This pass will attempt to move stores out of loops. When used in conjunction with -fgcse-lm, loops containing a load/store sequence can be changed to a load before the loop and a store after the loop. Not enabled at any optimization level. -fgcse-las When -fgcse-las is enabled, the global common subexpression elimination pass eliminates rendant loads that come after stores to the same memory location (both partial and full rendancies). Not enabled at any optimization level. -fgcse-after-reload When -fgcse-after-reload is enabled, a rendant load elimination pass is performed after reload. The purpose of this pass is to cleanup rendant spilling. -floop-optimize Perform loop optimizations: move constant expressions out of loops, simplify exit test con- ditions and optionally do strength-rection as well. Enabled at levels -O, -O2, -O3, -Os. -floop-optimize2 Perform loop optimizations using the new loop optimizer. The optimizations (loop unrolling, peeling and unswitching, loop invariant motion) are enabled by separate flags. -funsafe-loop-optimizations If given, the loop optimizer will assume that loop indices do not overflow, and that the loops with nontrivial exit condition are not infinite. This enables a wider range of loop optimizations even if the loop optimizer itself cannot prove that these assumptions are valid. Using -Wunsafe-loop-optimizations, the compiler will warn you if it finds this kind of loop. -fcrossjumping Perform cross-jumping transformation. This transformation unifies equivalent code and save code size. The resulting code may or may not perform better than without cross-jumping. Enabled at levels -O2, -O3, -Os. -fif-conversion Attempt to transform conditional jumps into branch-less equivalents. This include use of conditional moves, min, max, set flags and abs instructions, and some tricks doable by standard arithmetics. The use of conditional execution on chips where it is available is controlled by "if-conversion2". Enabled at levels -O, -O2, -O3, -Os. -fif-conversion2 Use conditional execution (where available) to transform conditional jumps into branch-less equivalents. Enabled at levels -O, -O2, -O3, -Os. -fdelete-null-pointer-checks Use global dataflow analysis to identify and eliminate useless checks for null pointers. The compiler assumes that dereferencing a null pointer would have halted the program. If a pointer is checked after it has already been dereferenced, it cannot be null. In some environments, this assumption is not true, and programs can safely dereference null pointers. Use -fno-delete-null-pointer-checks to disable this optimization for programs which depend on that behavior. Enabled at levels -O2, -O3, -Os. -fexpensive-optimizations Perform a number of minor optimizations that are relatively expensive. Enabled at levels -O2, -O3, -Os. -foptimize-register-move -fregmove Attempt to reassign register numbers in move instructions and as operands of other simple instructions in order to maximize the amount of register tying. This is especially helpful on machines with two-operand instructions. Note -fregmove and -foptimize-register-move are the same optimization. Enabled at levels -O2, -O3, -Os. -fdelayed-branch If supported for the target machine, attempt to reorder instructions to exploit instruction slots available after delayed branch instructions. Enabled at levels -O, -O2, -O3, -Os. -fschele-insns If supported for the target machine, attempt to reorder instructions to eliminate execution stalls e to required data being unavailable. This helps machines that have slow floating point or memory load instructions by allowing other instructions to be issued until the result of the load or floating point instruction is required. Enabled at levels -O2, -O3, -Os. -fschele-insns2 Similar to -fschele-insns, but requests an additional pass of instruction scheling after register allocation has been done. This is especially useful on machines with a rel- atively small number of registers and where memory load instructions take more than one cycle. Enabled at levels -O2, -O3, -Os. -fno-sched-interblock Don’t schele instructions across basic blocks. This is normally enabled by default when scheling before register allocation, i.e. with -fschele-insns or at -O2 or higher. -fno-sched-spec Don’t allow speculative motion of non-load instructions. This is normally enabled by default when scheling before register allocation, i.e. with -fschele-insns or at -O2 or higher. -fsched-spec-load Allow speculative motion of some load instructions. This only makes sense when scheling before register allocation, i.e. with -fschele-insns or at -O2 or higher. -fsched-spec-load-dangerous Allow speculative motion of more load instructions. This only makes sense when scheling before register allocation, i.e. with -fschele-insns or at -O2 or higher. -fsched-stalled-insns -fsched-stalled-insns=n Define how many insns (if any) can be moved prematurely from the queue of stalled insns into the ready list, ring the second scheling pass. -fno-fsched-stalled-insns and -fsched-stalled-insns=0 are equivalent and mean that no insns will be moved prematurely. If n is unspecified then there is no limit on how many queued insns can be moved prema- turely. -fsched-stalled-insns-dep -fsched-stalled-insns-dep=n Define how many insn groups (cycles) will be examined for a dependency on a stalled insn that is candidate for premature removal from the queue of stalled insns. This has an effect only ring the second scheling pass, and only if -fsched-stalled-insns is used and its value is not zero. +-fno-sched-stalled-insns-dep is equivalent to +-fsched-stalled-insns-dep=0. +-fsched-stalled-insns-dep without a value is equivalent to +-fsched-stalled-insns-dep=1. -fsched2-use-superblocks When scheling after register allocation, do use superblock scheling algorithm. Superblock scheling allows motion across basic block boundaries resulting on faster scheles. This option is experimental, as not all machine descriptions used by GCC model the CPU closely enough to avoid unreliable results from the algorithm. This only makes sense when scheling after register

3. 优化gcc编译apache参数 在四核linux上

CHOST是没错的 ，但是你的CFLAGS不对， 对于GCC4.2.2以上的版本 ，不需要那么复杂，-march=native就足够了

CHOST="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe -fomit-frame-pointer"
CXXFLAGS="${CFLAGS}"

而且目前的硬件环境，-O2足矣 ，-O3很多时候甚至不如-O2 ,而且可能会有隐患

当然如果你不太信任这个 ，还是觉得原始的-march好一点 那么可以用下面的

32位系统的调优参数

CHOST="i686-pc-linux-gnu"
CFLAGS="-march=prescott -O2 -pipe -fomit-frame-pointer"
CXXFLAGS="${CFLAGS}"

64位系统的调优参数

CHOST="x86_64-pc-linux-gnu"
CFLAGS="-march=nocona -O2 -pipe -fomit-frame-pointer"
CXXFLAGS="${CFLAGS}"

另外 事实上 -march=native是gcc自动选择最适合cpu的优化
-march=prescott 和 -march=nocona 前者是32位使用的 后者是64位使用的，而且这个march中已经包含了该级别cpu所有的-msse2 -mmmx -mfpmath=sse -msse3 -mssse3这些标签 所以不需要再额外添加

-msse2 -mmmx这些是针对-march=i686这样的基础标签的补充

另外，apache上，用gcc优化编译出来对性能可以说没什么提升，跟直接安装二进制包的差距微不可闻 ，毕竟apache是个吃内存的服务 所以 稳定性第一啦

4. (Linux)gcc进行优化编译的参数是什么

将file.c文件编译产生可执行文件myprog（-o选项），并且在编译的时候，生成调试信息(-g信息)。让gdb调试器可以调试该程序。
gcc是编译器程序名字
-o是可执行文件名字输出参数
-g是插入调试信息参数
当然是调试可执行文件myprog

5. gcc怎么编译c文件

通过gcc命令，最简单的单个文件的gcc xxx.c -o xxx，输出的就是可执行文件，如果编译链接没错的话，如果你有多个文件还要控制具体的编译优化这些选项，只需要在这基础上加上其他的编译选项即可。

6. gcc中有很多编译优化等级，vs2010中有吗

不一样
gcc和cl(vs调用的编译器)使用的参数是不一样的
但优化都有，只是级别，效果，命令行开关不完全一样

7. GCC编译器加上优化选项会不会自动去掉没用到的函数

实际上在编译之后还要链接，才能生成最终的目标代码。
在链接的过程中，只有用到的函数才会被链接进目标代码。也就是说，没有用到的函数不会被链接到目标代码，也不会增大目标代码的体积。

8. 怎样设置gcc编译出程序的struct member align

为了解决Unix自定义结构在GCC优化编译中对齐问题，一般解决办法是用如下宏封装
自定义结构

#pragma pack(1)

struct my_arphdr
{
};

#pragma pack()

如果是SPARC/Solaris，还可以这样

struct my_arphdr
{
} __attribute__ ((packed));

两种办法其实都可以用在Unix系统/GCC编译器中。

D: mbuf@smth

关于结构中字节对齐问题，相应编译器选项为

GCC/G++ : -fpack-struct
Sun Workshop cc/CC: -misalign

最好不这样做，会大大降低程序效率，特别在某些架构中。应该尝试用位操作来处理。

D: Unknown@smth

GCC可以这么解决

#ifdef __GCC__
#define PACKED __attribute__((__packed__))
#else
#define PACKED
#endif

struct msg
{
u_int16_t PACKED first;
...
};

还是 VC 简单，#include <pshpack1.h> 就搞定了

A: gfh_nuaa

DEC : #pragma pack(1)
SUN : #pragma pack(1)
AIX : 编译时 -q align=packed
HP-UX : #pragma pack 1

D: Joe Durusau

在 Visual C++ 中，使用 "-ZP1" 就可以让编译器对自定义结构进行单字节对齐，实
际就是取消了对齐优化。

A: [email protected] 2001-12-20 13:09

1) 结构内部成员的pack

struct foo
{
char a;
int b __attribute__ ((packed));
};

2) 整个结构的pack

struct foo
{
char a;
int b;
}__attribute__ ((packed));

3) 文件范围的pack

#pragma pack(1)

struct foo
{
char a;
int b;
};

... ...

4) 编译选项的pack

-fpack-struct

但这是最危险的做法，因为这样做可能会使库函数和你的程序对结构内成员的偏移理
解不一致。

9. Qt Creator里如何设置gcc编译的优化等级

不是release优化的问题。如果是直接运行的话，mingwm10.dll、libgcc_s_dw2-1.dll、qtcore4.dll、qtgui4.dll，还有相应的你用到的库都要放在运行目录下，用dependency walker可以看到dll依赖情况。
然后用到的插件比如qmltooling、imageformats等目录也需要拷到运行目录中，这个用工具看不到依赖，只能全拷然后用排除法，有经验之后代码里哪些用到了就知道了。

出现runtime library错误的最大可能性就是运行目录下的插件不完整。

另外有一种解决方法就是把qt改成静态链接，编译进exe，商业版允许这样做，lgpl版的话如果不是自用就有法律风险。