caes加密
完整的！
#include "stdio.h"
#include "memory.h"
#include "time.h"
#include "stdlib.h"
#define PLAIN_FILE_OPEN_ERROR -1
#define KEY_FILE_OPEN_ERROR -2
#define CIPHER_FILE_OPEN_ERROR -3
#define OK 1
typedef char ElemType;
/*初始置换表IP*/
int IP_Table[64] = { 57,49,41,33,25,17,9,1,
59,51,43,35,27,19,11,3,
61,53,45,37,29,21,13,5,
63,55,47,39,31,23,15,7,
56,48,40,32,24,16,8,0,
58,50,42,34,26,18,10,2,
60,52,44,36,28,20,12,4,
62,54,46,38,30,22,14,6};
/*逆初始置换表IP^-1*/
int IP_1_Table[64] = {39,7,47,15,55,23,63,31,
38,6,46,14,54,22,62,30,
37,5,45,13,53,21,61,29,
36,4,44,12,52,20,60,28,
35,3,43,11,51,19,59,27,
34,2,42,10,50,18,58,26,
33,1,41,9,49,17,57,25,
32,0,40,8,48,16,56,24};
/*扩充置换表E*/
int E_Table[48] = {31, 0, 1, 2, 3, 4,
3, 4, 5, 6, 7, 8,
7, 8,9,10,11,12,
11,12,13,14,15,16,
15,16,17,18,19,20,
19,20,21,22,23,24,
23,24,25,26,27,28,
27,28,29,30,31, 0};
/*置换函数P*/
int P_Table[32] = {15,6,19,20,28,11,27,16,
0,14,22,25,4,17,30,9,
1,7,23,13,31,26,2,8,
18,12,29,5,21,10,3,24};
/*S盒*/
int S[8][4][16] =
/*S1*/
{{{14,4,13,1,2,15,11,8,3,10,6,12,5,9,0,7},
{0,15,7,4,14,2,13,1,10,6,12,11,9,5,3,8},
{4,1,14,8,13,6,2,11,15,12,9,7,3,10,5,0},
{15,12,8,2,4,9,1,7,5,11,3,14,10,0,6,13}},
/*S2*/
{{15,1,8,14,6,11,3,4,9,7,2,13,12,0,5,10},
{3,13,4,7,15,2,8,14,12,0,1,10,6,9,11,5},
{0,14,7,11,10,4,13,1,5,8,12,6,9,3,2,15},
{13,8,10,1,3,15,4,2,11,6,7,12,0,5,14,9}},
/*S3*/
{{10,0,9,14,6,3,15,5,1,13,12,7,11,4,2,8},
{13,7,0,9,3,4,6,10,2,8,5,14,12,11,15,1},
{13,6,4,9,8,15,3,0,11,1,2,12,5,10,14,7},
{1,10,13,0,6,9,8,7,4,15,14,3,11,5,2,12}},
/*S4*/
{{7,13,14,3,0,6,9,10,1,2,8,5,11,12,4,15},
{13,8,11,5,6,15,0,3,4,7,2,12,1,10,14,9},
{10,6,9,0,12,11,7,13,15,1,3,14,5,2,8,4},
{3,15,0,6,10,1,13,8,9,4,5,11,12,7,2,14}},
/*S5*/
{{2,12,4,1,7,10,11,6,8,5,3,15,13,0,14,9},
{14,11,2,12,4,7,13,1,5,0,15,10,3,9,8,6},
{4,2,1,11,10,13,7,8,15,9,12,5,6,3,0,14},
{11,8,12,7,1,14,2,13,6,15,0,9,10,4,5,3}},
/*S6*/
{{12,1,10,15,9,2,6,8,0,13,3,4,14,7,5,11},
{10,15,4,2,7,12,9,5,6,1,13,14,0,11,3,8},
{9,14,15,5,2,8,12,3,7,0,4,10,1,13,11,6},
{4,3,2,12,9,5,15,10,11,14,1,7,6,0,8,13}},
/*S7*/
{{4,11,2,14,15,0,8,13,3,12,9,7,5,10,6,1},
{13,0,11,7,4,9,1,10,14,3,5,12,2,15,8,6},
{1,4,11,13,12,3,7,14,10,15,6,8,0,5,9,2},
{6,11,13,8,1,4,10,7,9,5,0,15,14,2,3,12}},
/*S8*/
{{13,2,8,4,6,15,11,1,10,9,3,14,5,0,12,7},
{1,15,13,8,10,3,7,4,12,5,6,11,0,14,9,2},
{7,11,4,1,9,12,14,2,0,6,10,13,15,3,5,8},
{2,1,14,7,4,10,8,13,15,12,9,0,3,5,6,11}}};
/*置换选择1*/
int PC_1[56] = {56,48,40,32,24,16,8,
0,57,49,41,33,25,17,
9,1,58,50,42,34,26,
18,10,2,59,51,43,35,
62,54,46,38,30,22,14,
6,61,53,45,37,29,21,
13,5,60,52,44,36,28,
20,12,4,27,19,11,3};
/*置换选择2*/
int PC_2[48] = {13,16,10,23,0,4,2,27,
14,5,20,9,22,18,11,3,
25,7,15,6,26,19,12,1,
40,51,30,36,46,54,29,39,
50,44,32,46,43,48,38,55,
33,52,45,41,49,35,28,31};
/*对左移次数的规定*/
int MOVE_TIMES[16] = {1,1,2,2,2,2,2,2,1,2,2,2,2,2,2,1};
int ByteToBit(ElemType ch,ElemType bit[8]);
int BitToByte(ElemType bit[8],ElemType *ch);
int Char8ToBit64(ElemType ch[8],ElemType bit[64]);
int Bit64ToChar8(ElemType bit[64],ElemType ch[8]);
int DES_MakeSubKeys(ElemType key[64],ElemType subKeys[16][48]);
int DES_PC1_Transform(ElemType key[64], ElemType tempbts[56]);
int DES_PC2_Transform(ElemType key[56], ElemType tempbts[48]);
int DES_ROL(ElemType data[56], int time);
int DES_IP_Transform(ElemType data[64]);
int DES_IP_1_Transform(ElemType data[64]);
int DES_E_Transform(ElemType data[48]);
int DES_P_Transform(ElemType data[32]);
int DES_SBOX(ElemType data[48]);
int DES_XOR(ElemType R[48], ElemType L[48],int count);
int DES_Swap(ElemType left[32],ElemType right[32]);
int DES_EncryptBlock(ElemType plainBlock[8], ElemType subKeys[16][48], ElemType cipherBlock[8]);
int DES_DecryptBlock(ElemType cipherBlock[8], ElemType subKeys[16][48], ElemType plainBlock[8]);
int DES_Encrypt(char *plainFile, char *keyStr,char *cipherFile);
int DES_Decrypt(char *cipherFile, char *keyStr,char *plainFile);
/*字节转换成二进制*/
int ByteToBit(ElemType ch, ElemType bit[8]){
int cnt;
for(cnt = 0;cnt < 8; cnt++){
*(bit+cnt) = (ch>>cnt)&1;
}
return 0;
}
/*二进制转换成字节*/
int BitToByte(ElemType bit[8],ElemType *ch){
int cnt;
for(cnt = 0;cnt < 8; cnt++){
*ch |= *(bit + cnt)<<cnt;
}
return 0;
}
/*将长度为8的字符串转为二进制位串*/
int Char8ToBit64(ElemType ch[8],ElemType bit[64]){
int cnt;
for(cnt = 0; cnt < 8; cnt++){
ByteToBit(*(ch+cnt),bit+(cnt<<3));
}
return 0;
}
/*将二进制位串转为长度为8的字符串*/
int Bit64ToChar8(ElemType bit[64],ElemType ch[8]){
int cnt;
memset(ch,0,8);
for(cnt = 0; cnt < 8; cnt++){
BitToByte(bit+(cnt<<3),ch+cnt);
}
return 0;
}
/*生成子密钥*/
int DES_MakeSubKeys(ElemType key[64],ElemType subKeys[16][48]){
ElemType temp[56];
int cnt;
DES_PC1_Transform(key,temp);/*PC1置换*/
for(cnt = 0; cnt < 16; cnt++){/*16轮跌代，产生16个子密钥*/
DES_ROL(temp,MOVE_TIMES[cnt]);/*循环左移*/
DES_PC2_Transform(temp,subKeys[cnt]);/*PC2置换，产生子密钥*/
}
return 0;
}
/*密钥置换1*/
int DES_PC1_Transform(ElemType key[64], ElemType tempbts[56]){
int cnt;
for(cnt = 0; cnt < 56; cnt++){
tempbts[cnt] = key[PC_1[cnt]];
}
return 0;
}
/*密钥置换2*/
int DES_PC2_Transform(ElemType key[56], ElemType tempbts[48]){
int cnt;
for(cnt = 0; cnt < 48; cnt++){
tempbts[cnt] = key[PC_2[cnt]];
}
return 0;
}
/*循环左移*/
int DES_ROL(ElemType data[56], int time){
ElemType temp[56];
/*保存将要循环移动到右边的位*/
memcpy(temp,data,time);
memcpy(temp+time,data+28,time);
/*前28位移动*/
memcpy(data,data+time,28-time);
memcpy(data+28-time,temp,time);
/*后28位移动*/
memcpy(data+28,data+28+time,28-time);
memcpy(data+56-time,temp+time,time);
return 0;
}
/*IP置换*/
int DES_IP_Transform(ElemType data[64]){
int cnt;
ElemType temp[64];
for(cnt = 0; cnt < 64; cnt++){
temp[cnt] = data[IP_Table[cnt]];
}
memcpy(data,temp,64);
return 0;
}
/*IP逆置换*/
int DES_IP_1_Transform(ElemType data[64]){
int cnt;
ElemType temp[64];
for(cnt = 0; cnt < 64; cnt++){
temp[cnt] = data[IP_1_Table[cnt]];
}
memcpy(data,temp,64);
return 0;
}
/*扩展置换*/
int DES_E_Transform(ElemType data[48]){
int cnt;
ElemType temp[48];
for(cnt = 0; cnt < 48; cnt++){
temp[cnt] = data[E_Table[cnt]];
}
memcpy(data,temp,48);
return 0;
}
/*P置换*/
int DES_P_Transform(ElemType data[32]){
int cnt;
ElemType temp[32];
for(cnt = 0; cnt < 32; cnt++){
temp[cnt] = data[P_Table[cnt]];
}
memcpy(data,temp,32);
return 0;
}
/*异或*/
int DES_XOR(ElemType R[48], ElemType L[48] ,int count){
int cnt;
for(cnt = 0; cnt < count; cnt++){
R[cnt] ^= L[cnt];
}
return 0;
}
/*S盒置换*/
int DES_SBOX(ElemType data[48]){
int cnt;
int line,row,output;
int cur1,cur2;
for(cnt = 0; cnt < 8; cnt++){
cur1 = cnt*6;
cur2 = cnt<<2;
/*计算在S盒中的行与列*/
line = (data[cur1]<<1) + data[cur1+5];
row = (data[cur1+1]<<3) + (data[cur1+2]<<2)
+ (data[cur1+3]<<1) + data[cur1+4];
output = S[cnt][line][row];
/*化为2进制*/
data[cur2] = (output&0X08)>>3;
data[cur2+1] = (output&0X04)>>2;
data[cur2+2] = (output&0X02)>>1;
data[cur2+3] = output&0x01;
}
return 0;
}
/*交换*/
int DES_Swap(ElemType left[32], ElemType right[32]){
ElemType temp[32];
memcpy(temp,left,32);
memcpy(left,right,32);
memcpy(right,temp,32);
return 0;
}
/*加密单个分组*/
int DES_EncryptBlock(ElemType plainBlock[8], ElemType subKeys[16][48], ElemType cipherBlock[8]){
ElemType plainBits[64];
ElemType Right[48];
int cnt;
Char8ToBit64(plainBlock,plainBits);
/*初始置换（IP置换）*/
DES_IP_Transform(plainBits);
/*16轮迭代*/
for(cnt = 0; cnt < 16; cnt++){
memcpy(Right,plainBits+32,32);
/*将右半部分进行扩展置换，从32位扩展到48位*/
DES_E_Transform(Right);
/*将右半部分与子密钥进行异或操作*/
DES_XOR(Right,subKeys[cnt],48);
/*异或结果进入S盒，输出32位结果*/
DES_SBOX(Right);
/*P置换*/
DES_P_Transform(Right);
/*将明文左半部分与右半部分进行异或*/
DES_XOR(plainBits,Right,32);
if(cnt != 15){
/*最终完成左右部的交换*/
DES_Swap(plainBits,plainBits+32);
}
}
/*逆初始置换（IP^1置换）*/
DES_IP_1_Transform(plainBits);
Bit64ToChar8(plainBits,cipherBlock);
return 0;
}
/*解密单个分组*/
int DES_DecryptBlock(ElemType cipherBlock[8], ElemType subKeys[16][48],ElemType plainBlock[8]){
ElemType cipherBits[64];
ElemType Right[48];
int cnt;
Char8ToBit64(cipherBlock,cipherBits);
/*初始置换（IP置换）*/
DES_IP_Transform(cipherBits);
/*16轮迭代*/
for(cnt = 15; cnt >= 0; cnt--){
memcpy(Right,cipherBits+32,32);
/*将右半部分进行扩展置换，从32位扩展到48位*/
DES_E_Transform(Right);
/*将右半部分与子密钥进行异或操作*/
DES_XOR(Right,subKeys[cnt],48);
/*异或结果进入S盒，输出32位结果*/
DES_SBOX(Right);
/*P置换*/
DES_P_Transform(Right);
/*将明文左半部分与右半部分进行异或*/
DES_XOR(cipherBits,Right,32);
if(cnt != 0){
/*最终完成左右部的交换*/
DES_Swap(cipherBits,cipherBits+32);
}
}
/*逆初始置换（IP^1置换）*/
DES_IP_1_Transform(cipherBits);
Bit64ToChar8(cipherBits,plainBlock);
return 0;
}
/*加密文件*/
int DES_Encrypt(char *plainFile, char *keyStr,char *cipherFile){
FILE *plain,*cipher;
int count;
ElemType plainBlock[8],cipherBlock[8],keyBlock[8];
ElemType bKey[64];
ElemType subKeys[16][48];
if((plain = fopen(plainFile,"rb")) == NULL){
return PLAIN_FILE_OPEN_ERROR;
}
if((cipher = fopen(cipherFile,"wb")) == NULL){
return CIPHER_FILE_OPEN_ERROR;
}
/*设置密钥*/
memcpy(keyBlock,keyStr,8);
/*将密钥转换为二进制流*/
Char8ToBit64(keyBlock,bKey);
/*生成子密钥*/
DES_MakeSubKeys(bKey,subKeys);
while(!feof(plain)){
/*每次读8个字节，并返回成功读取的字节数*/
if((count = fread(plainBlock,sizeof(char),8,plain)) == 8){
DES_EncryptBlock(plainBlock,subKeys,cipherBlock);
fwrite(cipherBlock,sizeof(char),8,cipher);
}
}
if(count){
/*填充*/
memset(plainBlock + count,'\0',7 - count);
/*最后一个字符保存包括最后一个字符在内的所填充的字符数量*/
plainBlock[7] = 8 - count;
DES_EncryptBlock(plainBlock,subKeys,cipherBlock);
fwrite(cipherBlock,sizeof(char),8,cipher);
}
fclose(plain);
fclose(cipher);
return OK;
}
/*解密文件*/
int DES_Decrypt(char *cipherFile, char *keyStr,char *plainFile){
FILE *plain, *cipher;
int count,times = 0;
long fileLen;
ElemType plainBlock[8],cipherBlock[8],keyBlock[8];
ElemType bKey[64];
ElemType subKeys[16][48];
if((cipher = fopen(cipherFile,"rb")) == NULL){
return CIPHER_FILE_OPEN_ERROR;
}
if((plain = fopen(plainFile,"wb")) == NULL){
return PLAIN_FILE_OPEN_ERROR;
}
/*设置密钥*/
memcpy(keyBlock,keyStr,8);
/*将密钥转换为二进制流*/
Char8ToBit64(keyBlock,bKey);
/*生成子密钥*/
DES_MakeSubKeys(bKey,subKeys);
/*取文件长度 */
fseek(cipher,0,SEEK_END);/*将文件指针置尾*/
fileLen = ftell(cipher); /*取文件指针当前位置*/
rewind(cipher); /*将文件指针重指向文件头*/
while(1){
/*密文的字节数一定是8的整数倍*/
fread(cipherBlock,sizeof(char),8,cipher);
DES_DecryptBlock(cipherBlock,subKeys,plainBlock);
times += 8;
if(times < fileLen){
fwrite(plainBlock,sizeof(char),8,plain);
}
else{
break;
}
}
/*判断末尾是否被填充*/
if(plainBlock[7] < 8){
for(count = 8 - plainBlock[7]; count < 7; count++){
if(plainBlock[count] != '\0'){
break;
}
}
}
if(count == 7){/*有填充*/
fwrite(plainBlock,sizeof(char),8 - plainBlock[7],plain);
}
else{/*无填充*/
fwrite(plainBlock,sizeof(char),8,plain);
}
fclose(plain);
fclose(cipher);
return OK;
}
int main()
{
clock_t a,b;
a = clock();
DES_Encrypt("1.txt","key.txt","2.txt");
b = clock();
printf("加密消耗%d毫秒\n",b-a);
system("pause");
a = clock();
DES_Decrypt("2.txt","key.txt","3.txt");
b = clock();
printf("解密消耗%d毫秒\n",b-a);
getchar();
return 0;
}
2. 使用C/C++语言,将DES/AES加密算法,用代码实现
哎，学校大作业吧。核心是des和aes的算法呗，自己一点点写代码量不很少呢。没时间给你写了。
不过有个很好的偷懒办法：建议lz你去找一下OpenSSL的源码。里面有AES，DES的原生C实现。现成函数。lz你直接从里面抠出来复制到你工程里就行了。。
3. AES加解密java与C互通
加密方式和结果都是互通的，但是实现方法就不一样了
4. 谁知道哪里有AES算法加密，解密c++/c语言代码
推荐用java，因为有现成的class给你用。。。如果用C++有好多东西需要自己写。可能java里面20行能搞定加密和解密的所有步骤，如果C++自己把所有算法加上各种数据类型转换之类的，无法估计多多少倍的代码了。前提还是你已经会写如果做密钥。
5. c语言socket加密，用Openssl中的AES+RSA还是SSL
1. 利用RSA安全传输aes生成密钥所需的Seed(32字节)
2. 利用aes_encrypt/aes_decrypt对Socket上面的业务数据进行aes加密/解密 理论上只需要aes就能保证全部流程，但由于aes加密所需要的aes-KEY是一个结构。
这个一个结构，如果通过网络进行传输，就需要对它进行网络编码，openssl里面没有现成的API 所以就引入RSA来完成首次安全的传输，保证Seed不会被窃听。
6. 求AES加密算法 C代码
以前编过的，c++可以用的
#include <iostream>
using namespace std;
long gcd(long a, long b)
{
if(b>a) //a中存放较大的数，b中存放较小的数
{
int temp;
temp=a;
a=b;
b=temp;
}
long n;
while((n=a%b)!=0)
{
a=b;
b=n;
}
return b;
}
//---------------------------------------
long cheng_niyuan(long a, long b)
{
for(long i=1; (i*a)%b!=1; i++);
return i;
}
//---------------------------------------
int mi_mo(int a, int b, int n)
{
int K[100];
int top=-1;
while(b)
{
top++;
K[top]=(b%2);
b/=2;
}
int c=0, f=1;
for(; top>=0; top--)
{
c=2*c;
f=(f*f)%n;
if(K[top]==1)
{
c+=1;
f=(f*a)%n;
}
}
return f;
}
//---------------------------------------
int main()
{
int p=5,q=11;
cout<<"p="<<p<<endl;
cout<<"q="<<q<<endl;
long int n=p*q;
cout<<"n="<<n<<endl;
long int fi_n=(p-1)*(q-1);
cout<<"fi_n="<<fi_n<<endl;
int e=3;
cout<<"e="<<e<<endl;
long d=cheng_niyuan(e,fi_n);
int M, C;
cout<<"请输入明文："<<endl;
cin>>M;
C=mi_mo(M, e, n);
cout<<"对应的密文为："<<endl;
cout<<C<<endl;
cout<<"请输入密文："<<endl;
cin>>C;
M=mi_mo(C, d, n);
cout<<"对应的明文为："<<endl;
cout<<M<<endl;
return 0;
}
7. c/c++实现AES加密，支持cbc等加密模式，支持多种填充模式，不要openssl实现的
使用VS2005下的Visual Studio 2005 Command Prompt进入控制台模式陪搜（这个模式会自动设置各种环境变量）
、解压缩openssl的包,进入openssl的目录
、perl configure VC-WIN32
尽量在这个目录下执行该命令，否则郑祥找不到Configure文件，或者指定完芦丛历整的Configure文件路径。
、ms\do_ms
在解压目录下执行ms\do_ms命令
、nmake -f ms\ntdll.mak编译后在openssl解压目录下执行，完成编译后。输出的文件在out32dll里面，包括应用程序的可执行文件、lib文件和dll文件
注意：在运行第五步时，cl编译器会抱怨说.\crypto\des\enc_read.c文件的read是The POSIX name for this item is deprecated（不被推荐的），建议使用_read。呵呵，我可不想将OpenSSL中的所有的read函数修改为_read。再看cl的错误代码 error C2220，于是上MSDN上查找：
warning treated as error - no object file generated
/WX tells the compiler to treat all warnings as errors. Since an error occurred, no object or executable file was generated.
是由于设置了/WX选项，将所有的警告都作为错误对待，所以。。。
于是打开OpenSSL目录下的MS目录下的ntdll.mak文件，将CFLAG的/WX选项去掉，存盘。
8. 高分求完整aes加密程序(C/C++)，Linux下就完美了。
如果你是程序开发人员，应该有自己动手查找资源的能力啊，这个AES很好找啊。
这个是github上的专门为嵌入式优化过的，作者介绍ARM上大概使用200bytesRAM和2.5KROM
https://github.com/kokke/tiny-AES128-C
为防你上不了github，我直接下下来做了个附件