opensslphpcentos
❶ 阿里云默认centos7上怎么安装php
首先更新系统软件</str>
$ yum update
安装nginx</str></str>
1.安装nginx源
$ yum localinstall http://nginx.org/packages/centos/7/noarch/RPMS/nginx-release-centos-7-0.el7.ngx.noarch.rpm2.安装nginx
$ yum install nginx
3.启动nginx
$ service nginx start
Redirecting to /bin/systemctl start nginx.service4.访问http://你的ip/
如果成功安装会出来nginx默认的欢迎界面
安装Mysql5.7.*
</str>
1.安装mysql源</str>
$ yum localinstall http://dev.mysql.com/get/mysql57-community-release-el7-7.noarch.rpm2.安装mysql
$ yum install mysql-community-server
确认一下mysql的版本，有时可能会提示mysql5.63.安装mysql的开发包，以后会有用
$ yum install mysql-community-devel
4.启动mysql
$ service mysqld start
Redirecting to /bin/systemctl start mysqld.service5.查看mysql启动状态
$ service mysqld status
出现pid
证明启动成功
6.获取mysql默认生成的密码
$ grep 'temporary password' /var/log/mysqld.log2015-12-05T05:41:09.104758Z 1 [Note] A temporary password is generated for root@localhost: %G1Rgns!dD!v</str>
加粗的就是生成的密码
7.换成自己的密码
$ mysql -uroot -p
Enter password:输入上面的密码
成功输入后进入一下步，这里你估计会输入 好几次才进去8. 更换密码
mysql> ALTER USER 'root'@'localhost' IDENTIFIED BY 'MyNewPass4!';这个密码一定要足够复杂，不然会不让你改，提示密码不合法;9.退出mysql;
mysql> quit;
10.用新密码再登录，试一下新密码
$ mysql -uroot -p
Enter password:输入你的新密码
11.确认密码正确后，退出mysql;
mysql> quit;
编译安装php7.0.0
</str>
</str>
1.下载php7源码包</str>
$ cd /root & wget -O php7.tar.gz http://cn2.php.net/get/php-7.0.1.tar.gz/from/this/mirror2.解压源码包</str>
$ tar -xvf php7.tar.gz
3.</str>
$ cd php-7.0.1
4.安装php依赖包</str>
</str>
$ yum install libxml2 libxml2-devel openssl openssl-devel bzip2 bzip2-devel libcurl libcurl-devel libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel gmp gmp-devel libmcrypt libmcrypt-devel readline readline-devel libxslt libxslt-devel5.编译配置，这一步我们会遇到很多configure error，我们一一解决，基本都是相关软件开发包没有安装导致</str>
</str>
$ ./configure \
--prefix=/usr/local/php \
--with-config-file-path=/etc \
--enable-fpm \
--with-fpm-user=nginx \
--with-fpm-group=nginx \
--enable-inline-optimization \
--disable-debug \
--disable-rpath \
--enable-shared \
--enable-soap \
--with-libxml-dir \
--with-xmlrpc \
--with-openssl \
--with-mcrypt \
--with-mhash \
--with-pcre-regex \
--with-sqlite3 \
--with-zlib \
--enable-bcmath \
--with-iconv \
--with-bz2 \
--enable-calendar \
--with-curl \
--with-cdb \
--enable-dom \
--enable-exif \
--enable-fileinfo \
--enable-filter \
--with-pcre-dir \
--enable-ftp \
--with-gd \
--with-openssl-dir \
--with-jpeg-dir \
--with-png-dir \
--with-zlib-dir \
--with-freetype-dir \
--enable-gd-native-ttf \
--enable-gd-jis-conv \
--with-gettext \
--with-gmp \
--with-mhash \
--enable-json \
--enable-mbstring \
--enable-mbregex \
--enable-mbregex-backtrack \
--with-libmbfl \
--with-onig \
--enable-pdo \
--with-mysqli=mysqlnd \
--with-pdo-mysql=mysqlnd \
--with-zlib-dir \
--with-pdo-sqlite \
--with-readline \
--enable-session \
--enable-shmop \
--enable-simplexml \
--enable-sockets \
--enable-sysvmsg \
--enable-sysvsem \
--enable-sysvshm \
--enable-wddx \
--with-libxml-dir \
--with-xsl \
--enable-zip \
--enable-mysqlnd-compression-support \
--with-pear \
--enable-opcache
configure error:
1.configure: error: xml2-config not found. Please check your libxml2 installation.
解决：
$ yum install libxml2 libxml2-devel
2.configure: error: Cannot find OpenSSL's <evp.h>
解决：
$ yum install openssl openssl-devel
3.configure: error: Please reinstall the BZip2 distribution解决：
$ yum install bzip2 bzip2-devel
4.configure: error: Please reinstall the libcurl distribution - easy.h should be in <curl-dir>/include/curl/解决：
$ yum install libcurl libcurl-devel
5.If configure fails try --with-webp-dir=<DIR> configure: error: jpeglib.h not found.
解决：
$ yum install libjpeg libjpeg-devel
6.If configure fails try --with-webp-dir=<DIR>
checking for jpeg_read_header in -ljpeg... yesconfigure: error: png.h not found.
解决：
$ yum install libpng libpng-devel
7.If configure fails try --with-webp-dir=<DIR>
checking for jpeg_read_header in -ljpeg... yeschecking for png_write_image in -lpng... yesIf configure fails try --with-xpm-dir=<DIR>
configure: error: freetype-config not found.
解决：
$ yum install freetype freetype-devel
8.configure: error: Unable to locate gmp.h解决：
$ yum install gmp gmp-devel
9.configure: error: mcrypt.h not found. Please reinstall libmcrypt.
解决：
$ yum install libmcrypt libmcrypt-devel
10.configure: error: Please reinstall readline - I cannot find readline.h解决：
$ yum install readline readline-devel
11.configure: error: xslt-config not found. Please reinstall the libxslt >= 1.1.0 distribution解决：
$ yum install libxslt libxslt-devel
6.编译与安装
$ make && make install
这里要make好久，要耐心一下
7.添加 PHP 命令到环境变量
$ vim /etc/profile
在末尾加入
PATH=$PATH:/usr/local/php/bin
export PATH
要使改动立即生效执行
$ ./etc/profile
或
$ source /etc/profile
查看环境变量
$ echo $PATH
查看php版本
$ php -v
8.配置php-fpm
$ cp php.ini-proction /etc/php.ini
$ cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf$ cp /usr/local/php/etc/php-fpm.d/www.conf.default /usr/local/php/etc/php-fpm.d/www.conf$ cp sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm$ chmod +x /etc/init.d/php-fpm
9.启动php-fpm
$ /etc/init.d/php-fpm start
配置nginx虚拟机,绑定域名</str>
1.
</str>
$ vim /etc/nginx/conf.d/php7.thinkcmf.com.conf这里可以把php7.thinkcmf.com.conf改成自己的域名把下面的内容复制到php7.thinkcmf.com.conf里server{
listen 80;
server_name php7.thinkcmf.com;
root /var/www/html/php7.thinkcmf.com; # 该项要修改为你准备存放相关网页的路径location / {
index index.php index.html index.htm;
#如果请求既不是一个文件，也不是一个目录，则执行一下重写规则if (!-e $request_filename)
{
#地址作为将参数rewrite到index.php上。
rewrite ^/(.*)$ /index.php/$1;
#若是子目录则使用下面这句，将subdir改成目录名称即可。
#rewrite ^/subdir/(.*)$ /subdir/index.php/$1;}
}
#proxy the php scripts to php-fpm
location ~ \.php {
include fastcgi_params;
##pathinfo支持start
#定义变量 $path_info ，用于存放pathinfo信息set $path_info "";
#定义变量 $real_script_name，用于存放真实地址set $real_script_name $fastcgi_script_name;#如果地址与引号内的正则表达式匹配
if ($fastcgi_script_name ~ "^(.+?\.php)(/.+)$") {#将文件地址赋值给变量 $real_script_name
set $real_script_name $1;
#将文件地址后的参数赋值给变量 $path_info
set $path_info $2;
}
#配置fastcgi的一些参数
fastcgi_param SCRIPT_FILENAME $document_root$real_script_name;fastcgi_param SCRIPT_NAME $real_script_name;fastcgi_param PATH_INFO $path_info;
###pathinfo支持end
fastcgi_intercept_errors on;
fastcgi_pass 127.0.0.1:9000;
}
}
2.重启nginx
$ service nginx reload
3.
$ vim /var/www/html/php7.thinkcmf.com/index.php</str>
把下面的代码复制到这个文件 里
<?php
phpinfo();
4.查看访问http://php7.thinkcmf.com
❷ centos 6.0安装php-5.2.17报错： 前提是mysql已经安装，已经成功启动OK
1、no mysql_config not found configure: error
2、你的配置
--with-mysql=/usr/local/mysql
--with-mysqli=/usr/local/mysql/bin/ mysql_config 查查这个地方,似乎有个空格
--with-mysql-sock=/tmp/mysql.sock
3、确认已经安装mysql-devel
rpm -qa|grep mysql-devel
4、如果php5.3可以用mysqlnd (MySQL native driver for PHP)
--with-mysql=mysqlnd \
--with-mysqli=mysqlnd \
--with-pdo-mysql=mysqlnd
❸ php5.5.38开启openssl扩展
Failed to create directory
CCLOG("AssetsManagerEx : can not create directory %s\n", fullPath.c_str());
unzClose(zipfile);
return false;
}
}
❹ PHP7.2 安装openssl扩展报错问题。(centos7.7)
试试重新安装看可行
删除旧版本：yum remove -y openssl openssl-devel 源码安装openssl需要perl环境编译，如果没有perl环境还是需要安装：yum -y install perl perl-devel
1.下载源码包
wget https://www.openssl.org/source/openssl-1.0.2l.tar.gz
2.解压源码包并进入解压后的目录：
tar zxf openssl-1.0.2l.tar.gz
cd openssl-1.0.2l
3.配置并编译安装：
./config -fPIC --prefix=/usr/local/openssl/ enable-shared && make && make install
注释：
--prefix：指定安装目录
-fPIC:编译openssl的静态库
enable-shared:编译动态库
4.加入环境变量，以便方便使用openssl命令：
echo "export PATH=$PATH:/usr/local/openssl/bin" >>/etc/profile
source /etc/profile
5.将库文件路径写入/etc/ld.so.conf文件中，方便调用库文件
echo "include /usr/local/openssl2/lib" >> /etc/ld.so.conf
ldconfig
6.查看openssl命令路径：
which openssl
/usr/local/openssl/bin/openssl
查看版本号：
openssl version -a
❺ 安装centos时自动安装的php怎么卸载
CentOS 5/get/php-5.3.6.tar.bz2/from/this/mirror # tar -xjf php-5.3.6.tar.bz2 配置安装参数 ./configure --build=i686-RedHat-linux-gnu --host=i686-redhat-linux-gnu --target=i686-RedHat-linux-gnu --with-apxs2=/usr/sbin/apxs --prefix=/usr/local --exec-prefix=/usr/local --with-exec-dir=/usr/local/bin --sysconfdir=/etc --libdir=/usr/local/lib/php --with-libdir=lib --sbindir=/usr/local/sbin --sharedstatedir=/usr/com --datadir=/usr/local/share --includedir=/usr/local/include --libexecdir=/usr/local/libexec --localstatedir=/var --cache-file=../config.cache --mandir=/usr/local/share/man --infodir=/usr/local/share/info --with-config-file-path=/etc --with-config-file-scan-dir=/etc/php.d --with-pic --with-curl=shared --with-freetype-dir --with-png-dir --with-gettext --with-gmp --with-iconv --with-jpeg-dir --with-png-dir --with-openssl --with-layout=GNU --with-libxml-dir --with-pcre-regex=/usr --with-mcrypt=shared --with-mhash --with-zlib --with-bz2=shared --with-pdo-mysql --with-mysql --with-mysql-sock=/var/lib/mysql/mysql.sock --with-pgsql --with-pdo-pgsql --with-sqlite=shared --with-pdo-sqlite=shared --enable-sqlite-utf8 --with-kerberos --with-imap --with-imap-ssl --with-pear --with-gd --enable-gd-native-ttf --enable-calendar=shared --enable-exif --enable-ftp --enable-sockets --enable-bcmath --enable-sysvsem --enable-sysvshm --enable-sysvmsg --enable-intl --enable-mbstring --enable-zend-multibyte --enable-zip --without-unixODBC --disable-tokenizer 非RHEL/CentOS系统可以省略 --build，--host，--target 参数，程序会自动判断（linux一般为i686-pc-linux-gnu）。如果没安装pgsql或者不需要pgsql的支持可以删除相关参数（共2个）。 bz2, calendar, curl, mcrypt, pdo_sqlite, sqlite 这些模块采用动态编译，可采用下面将会提到的方法加载。编译并安装 # make && make install 安装结果摘要，里面有几个主要的安装路径变量 libtool: install: warning: remember to run `libtool --finish /usr/local/src/php-5.3.6/libs [activating mole `php5 in /etc/httpd/conf/httpd.conf] Installing PHP CLI binary: /usr/local/bin/ Installing PHP CLI man page: /usr/local/share/man/man1/ Installing shared extensions: /usr/local/lib/php/20090626/ Installing build environment: /usr/local/lib/php/build/ Installing header files: /usr/local/include/php/ Installing helper programs: /usr/local/bin/ program: phpize program: php-config Installing man pages: /usr/local/share/man/man1/ Installing PEAR environment: /usr/local/share/pear/ 貌似要运行一次libtool --finish ....，不过我运行后也没什么奇特效果~ 更新httpd配置文件以便apache能解析php文件 # vim /etc/httpd/conf/httpd.conf 添加以下内容 AddType application/x-httpd-php .php AddType application/x-httpd-php-source .phps 如果在卸载原有PHP之前没备份php.ini文件，那么可以从PHP编译目录中把 php.ini-proction 拷贝到 /etc目录下并改名为 php.ini # mv /usr/local/src/php-5.3.6/php.ini-proction /etc/php.ini 添加或者更新相关设置，比如： extension_dir = "/usr/local/lib/php/20090626" # 以下六个模块可根据需要添加 extension = bz2.so extension = calendar.so extension = curl.so extension = mcrypt.so extension = pdo_sqlite.so extension = sqlite.so max_execution_time = 30 max_input_time = 60 memory_limit = 128M variables_order = "EGPCS" register_globals = Off register_long_arrays = Off post_max_size = 30M upload_max_filesize = 30M mbstring.internal_encoding = UTF-8 date.timezone = Asia/Chongqing 测试结果。在 /var/www/html 下面新建一个文件 phpinfo.php ，里面包含内容 Php代码 <?php phpinfo(); ?> 重启apache服务 # service httpd restart
❻ 请教centos php 多版本安装共存切换
Linux下部署php多版本共存
背景说明
自php7问世，身为最新版本控的我马上升级体验，但是由于服务器上还有旧程序在运行，只好部署一个php多版本共存环境。
现有环境是lnmp
- CentOS 6.7
- nginx 1.10.1
- mariadb-10.0.26
- php 7.0.8
为了更好兼容旧的php程序，推荐使用5.4.45. 主要是兼容mysql扩展。
开始安装
首先要下载php-5.4.45.tar.gz源码包。
通过源码安装
# tar xzvf php-5.4.45.tar.gz
# cd php-5.4.45
# ./configure --prefix=/usr/local/php54 --with-config-file-path=/usr/local/php54/etc --enable-fpm --with-fpm-user=www --with-fpm-group=www --with-mysql=mysqlnd --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --with-iconv-dir --with-freetype-dir=/usr/local/freetype --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --enable-mbregex --enable-mbstring --with-mcrypt --enable-ftp --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-xmlrpc --enable-zip --enable-soap --with-gettext --disable-fileinfo --enable-intl --with-xsl
# make ZEND_EXTRA_LIBS='-liconv'
# make install
# cp php.ini-proction /usr/local/php/etc/php.ini
------------------------------------------------------------------------------------------------
php.ini 配置
post_max_size = 50M
upload_max_filesize = 50M
date.timezone = PRC
short_open_tag = On
cgi.fix_pathinfo=0
max_execution_time = 300
disable_functions=passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec,proc_open,proc_get_status,popen,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server
------------------------------------------------------------------------------------------------
php-fpm.conf 配置
------------------------------
# vim /usr/local/php/etc/php-fpm.conf1
[global]
pid = /usr/local/php54/var/run/php-fpm.pid
error_log = /usr/local/php54/var/log/php-fpm.log
log_level = notice
[www]
listen = /tmp/php54-cgi.sock
listen.backlog = -1
listen.allowed_clients = 127.0.0.1:9001
listen.owner = www
listen.group = www
listen.mode = 0666
user = www
group = www
pm = dynamic
pm.max_children = 40
pm.start_servers = 20
pm.min_spare_servers = 20
pm.max_spare_servers = 40
request_terminate_timeout = 100
request_slowlog_timeout = 0
slowlog = var/log/slow.log
----------------------------------------------------------------------------------
启动 php-fpm
# cp sapi/fpm/init.d.php-fpm /etc/init.d/php54-fpm
# chmod +x /etc/init.d/php54-fpm
# /etc/init.d/php54-fpm start
-------------------------------------------------------------------------------------------
修改nginx配置，对需要的服务配置使用php-5.4.45
location ~ [^/]\.php(/|$)
{
try_files $uri =404;
fastcgi_pass unix:/tmp/php54-cgi.sock;
fastcgi_index index.php;
include fastcgi.conf;
}
----------------------------------------------------------------------------------------
配置php-5.4.45 的php54-fpm 开机自动启动
# chkconfig --add php54-fpm
# chkconfig php54-fpm on
❼ centos6.5怎么安装php5.5
1.******已安装Nginx******
ps -aux | grep nginx
netstat -anptu | grep 80
2.清除系统中php痕迹：
yum remove php
rm -rvf /etc/php
rm -rvf /etc/php.ini
rm -f /usr/bin/php
3.安装php所需软件包：
tar zxvf autoconf-2.68.tar.gz -C /usr/src
cd /usr/src/autoconf-2.68/
./configure && make && make install
tar zxvf libiconv-1.14.tar.gz -C /usr/src
cd /usr/src/libiconv-1.14/
./configure && make && make install
tar zxvf libmcrypt-2.5.8.tar.gz -C /usr/src
cd /usr/src/libmcrypt-2.5.8/
./configure && make && make install
ldconfig
cd libltdl/
./configure --enable-ltdl-install
make && make install
export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH
tar zxvf mhash-0.9.9.9.tar.gz -C /usr/src
cd /usr/src/mhash-0.9.9.9/
./configure && make && make install
tar zxvf mcrypt-2.6.8.tar.gz -C /usr/src
cd /usr/src/mcrypt-2.6.8/
./configure && make && make install
4.加载php动态模块：
ln -s /usr/local/lib/libmcrypt.la /usr/lib64/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib64/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib64/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8
/usr/lib64/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib64/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib64/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib64/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib64/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1
/usr/lib64/libmhash.so.2.0.1
cp -R /usr/lib64/libpng.* /usr/lib/
cp -R /usr/lib64/libjpeg.* /usr/lib/
echo "/lib" >> /etc/ld.so.conf
echo "/usr/lib" >> /etc/ld.so.conf
echo "/usr/lib64" >> /etc/ld.so.conf
echo "/usr/local/lib" >> /etc/ld.so.conf
echo "* soft nproc 65535" >> /etc/security/limits.conf
echo "* hard nproc 65535" >> /etc/security/limits.conf
echo "* soft nofile 65535" >> /etc/security/limits.conf
echo "* hard nofile 65535" >> /etc/security/limits.conf
echo "fs.file-max=65535" >> /etc/sysctl.conf
ldconfig
5.解压、配置、编译、安装php：
tar zxvf php-5.5.25.tar.gz -C /usr/src
cd /usr/src/php-5.5.25/
./configure --prefix=/usr/local/php \
--with-config-file-path=/usr/local/php/etc \
--enable-fpm \
--with-fpm-user=www \
--with-fpm-group=www \
--with-mysql=mysqlnd \
--with-mysqli=mysqlnd \
--with-pdo-mysql=mysqlnd \
--with-iconv-dir \
--with-freetype-dir \
--with-jpeg-dir \
--with-png-dir \
--with-zlib \
--with-libxml-dir=/usr \
--enable-xml \
--enable-opcache \
--disable-rpath \
--enable-bcmath \
--enable-shmop \
--enable-sysvsem \
--enable-inline-optimization \
--with-curl \
--enable-mbregex \
--enable-mbstring \
--with-mcrypt \
--enable-ftp \
--with-gd \
--enable-gd-native-ttf \
--with-openssl \
--with-mhash \
--enable-pcntl \
--enable-sockets \
--with-xmlrpc \
--enable-zip \
--enable-soap \
--without-pear \
--with-gettext \
--disable-fileinfo
make ZEND_EXTRA_LIBS='-liconv'
make install
6.链接php可执行文件：
ln -s /usr/local/php/bin/php /usr/bin/php
ln -s /usr/local/php/bin/phpize /usr/bin/phpize
ln -s /usr/local/php/sbin/php-fpm /usr/bin/php-fpm
7.编辑php.ini配置文件：
cp /usr/src/php-5.5.25/php.ini-proction
/usr/local/php/etc/php.ini
ln -s /usr/local/php/etc/php.ini /etc/php.ini
vim /etc/php.ini
[PHP]
engine = On
zend.ze1_compatibility_mode = Off
short_open_tag = On
asp_tags = Off
precision
= 12
y2k_compliance = On
output_buffering = On
zlib.output_compression = Off
implicit_flush = Off
unserialize_callback_func=
serialize_precision = 100
safe_mode = Off
safe_mode_gid = Off
safe_mode_include_dir =
safe_mode_exec_dir =
safe_mode_allowed_env_vars = PHP_
safe_mode_protected_env_vars = LD_LIBRARY_PATH
disable_functions =
passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec,proc_open,proc_get_status,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server,fsocket
disable_classes =
expose_php = On
error_reporting = E_ALL & ~E_NOTICE
display_errors = On
display_startup_errors = Off
log_errors = Off
log_errors_max_len = 1024
ignore_repeated_errors = Off
ignore_repeated_source = Off
report_memleaks = On
track_errors = Off
variables_order = "EGPCS"
register_globals = Off
register_long_arrays = Off
register_argc_argv = On
auto_globals_jit = On
post_max_size = 50M
magic_quotes_gpc = Off
magic_quotes_runtime = Off
magic_quotes_sybase = Off
auto_prepend_file =
auto_append_file =
default_mimetype = "text/html"
doc_root =
user_dir =
extension_dir =
"/usr/local/php/lib/php/extensions/no-debug-non-zts-20121212/"
enable_dl = On
cgi.fix_pathinfo=0
file_uploads = On
upload_max_filesize = 50M
max_file_uploads = 20
allow_url_fopen = On
allow_url_include = Off
default_socket_timeout = 60
[Date]
date.timezone = PRC
[filter]
[iconv]
[sqlite]
[Pcre]
[Syslog]
define_syslog_variables = Off
[mail function]
SMTP = localhost
smtp_port = 25
[SQL]
sql.safe_mode = Off
[ODBC]
odbc.allow_persistent = On
odbc.check_persistent = On
odbc.max_persistent = -1
odbc.max_links = -1
odbc.defaultlrl = 4096
odbc.defaultbinmode = 1
[MySQL]
mysql.allow_persistent = On
mysql.max_persistent = -1
mysql.max_links = -1
mysql.default_port =
mysql.default_socket =
mysql.default_host =
mysql.default_user =
mysql.default_password =
mysql.connect_timeout = 60
mysql.trace_mode = Off
[MySQLi]
mysqli.max_links = -1
mysqli.default_port = 3306
mysqli.default_socket =
mysqli.default_host =
mysqli.default_user =
mysqli.default_pw =
mysqli.reconnect = Off
[mSQL]
msql.allow_persistent = On
msql.max_persistent = -1
msql.max_links = -1
[OCI8]
[PostgresSQL]
pgsql.allow_persistent = On
pgsql.auto_reset_persistent = Off
pgsql.max_persistent = -1
pgsql.max_links = -1
pgsql.ignore_notice = 0
pgsql.log_notice = 0
[Sybase]
sybase.allow_persistent = On
sybase.max_persistent = -1
sybase.max_links = -1
sybase.min_error_severity = 10
sybase.min_message_severity = 10
sybase.compatability_mode = Off
[Sybase-CT]
sybct.allow_persistent = On
sybct.max_persistent = -1
sybct.max_links = -1
sybct.min_server_severity = 10
sybct.min_client_severity = 10
[bcmath]
bcmath.scale = 0
[browscap]
[Informix]
ifx.default_host =
ifx.default_user =
ifx.default_password =
ifx.allow_persistent = On
ifx.max_persistent = -1
ifx.max_links = -1
ifx.textasvarchar = 0
ifx.byteasvarchar = 0
ifx.charasvarchar = 0
ifx.blobinfile = 0
ifx.nullformat = 0
[Session]
session.save_handler = files
session.use_cookies = 1
session.name = PHPSESSID
session.auto_start = 0
session.cookie_lifetime = 0
session.cookie_path = /
session.cookie_domain =
session.cookie_httponly =
session.serialize_handler = php
session.gc_probability = 1
session.gc_divisor
= 100
session.gc_maxlifetime = 1440
session.bug_compat_42 = 1
session.bug_compat_warn = 1
session.referer_check =
session.entropy_length = 0
session.entropy_file =
session.cache_limiter = nocache
session.cache_expire = 180
session.use_trans_sid = 0
session.hash_function = 0
session.hash_bits_per_character = 4
url_rewriter.tags =
"a=href,area=href,frame=src,input=src,form=,fieldset="
[MSSQL]
mssql.allow_persistent = On
mssql.max_persistent = -1
mssql.max_links = -1
mssql.min_error_severity = 10
mssql.min_message_severity = 10
mssql.compatability_mode = Off
mssql.secure_connection = Off
[Assertion]
[COM]
[mbstring]
[FrontBase]
[gd]
[exif]
[Tidy]
tidy.clean_output = Off
[soap]
soap.wsdl_cache_enabled=1
soap.wsdl_cache_dir="/tmp"
soap.wsdl_cache_ttl=86400
[Zend Optimizer]
zend_extension =
/usr/local/php/lib/php/extensions/no-debug-non-zts-20121212/opcache.so
zend_loader.enable = 1
zend_loader.disable_licensing = 0
zend_loader.obfuscation_level_support = 3
8.编辑php-fpm.conf配置文件：
cp /usr/local/php/etc/php-fpm.conf.default
/usr/local/php/etc/php-fpm.conf
vim /usr/local/php/etc/php-fpm.conf
[global]
pid = /home/php/pid/php-fpm.pid
error_log = /home/php/log/php-fpm_error.log
log_level = notice
[www]
listen = 127.0.0.1:9000
listen.backlog = -1
listen.allowed_clients = 127.0.0.1
listen.owner = www
listen.group = www
listen.mode = 0666
user = www
group = www
pm = dynamic
pm.max_children = 10
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 6
request_terminate_timeout = 100
request_slowlog_timeout = 0
slowlog = /home/php/log/slow.log
9.编写php-fpm启动脚本
vim /etc/init.d/php-fpm
#!/bin/sh
# chkconfig:
2345 90
10
#
Description:
Start and
Stop php-fpm
# Provides:
php-fpm
#
Default-Start:
2 3 4 5
#
Default-Stop:
0 1 6
prefix=/usr/local/php
exec_prefix=${prefix}
php_fpm_BIN=${prefix}/sbin/php-fpm
php_fpm_CONF=${prefix}/etc/php-fpm.conf
php_fpm_PID=/home/php/pid/php-fpm.pid
php_opts="--fpm-config $php_fpm_CONF --pid $php_fpm_PID"
wait_for_pid () {
try=0
while test $try -lt 35 ; do
case "$1" in
'created')
if [ -f "$2" ] ; then
try=''
break
fi
;;
'removed')
if [ ! -f "$2" ] ; then
try=''
break
fi
;;
esac
echo -n .
try=`expr $try + 1`
sleep 1
done
}
case "$1" in
start)
echo -n "Starting php-fpm..."
$php_fpm_BIN --daemonize $php_opts
if [ "$?" != 0 ] ; then
echo " failed"
exit 1
fi
wait_for_pid created $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
stop)
echo -n "Stoping php-fpm..."
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -QUIT `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed. Use force-quit"
exit 1
else
echo " done"
fi
;;
force-quit)
echo -n "Terminating php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -TERM `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
restart)
$0 stop
$0 start
;;
reload)
echo -n "Reload service php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -USR2 `cat $php_fpm_PID`
echo " done"
;;
*)
echo "Usage: $0 {start|stop|force-quit|restart|reload}"
exit 1
;;
esac
10.创建目录并修改权限，重启nginx服务：
mkdir -p /home/php/log
mkdir -p /home/php/pid
chown -R www:www /home/php/log
chown -R www:www /home/php/pid
service nginx restart
11.添加php-fpm系统服务：
chmod +x /etc/init.d/php-fpm
chkconfig --add php-fpm
chkconfig --level 2345 php-fpm on
chkconfig --list | grep php-fpm
12.启动php-fpm服务：
service php-fpm start
ps -aux | grep php-fpm
netstat -anptu | grep 9000
13.配置php测试页：
vim /home/www/html/phpinfo.php
❽ CentOS PHP CURL不能达成一个可以接受的安全参数问题，怎么解决
你可以看一下我下面的建议。在centos 6上面,curl模块的ssl 支持默认为NSS，涉及到的程序里有https，是需要双向认证的，这时使用NSS会报错,所以需要更换为openssl.
一、查看系统
二、得到curl当前版本是7.19.7，同样版本,然后解压、编译。这样你想了解的更多的话，你可以去后盾人看一些类似的视频，这样也许更加有帮助。