ftp无法解码python
① 怎么解决python在连接ftp时报错：EOFError
Errno 10060是连接超时的错误代码。
2种可能：网络不通 或者的21端口上没有开启ftp服务
1、Error后面没有错误代码
2、我使用SSH自带的ftp可以打开，说明并不是网络的问题
PS：复制粘贴的答案吧，Error都打错了？
② ftp域名无法解析
你是通过校园网还是外网进入呢？可能外网不能访问校园网，所以你不能进去FTP
③ 访问ftp服务器时无法解析服务器名称和地址
是在同一台机器上么？如果是的可能是你的配置有问题，但如果不是，最大的可能性就是你的ip地址被锁了。在C:\WINDOWS\system32\drivers\etc文件夹下面用文本文件打开HOSTS文件127.0.0.1 本地地址下 加上自己的IP地址和域名如： 192.168.0.53 ****.vicp.net
④ ftp局域网无法解析服务器地址怎么办
不太明白你的意思，是ftp软件无法解析外网的服务器地址还是说你要用局域网里面的一台电脑做FTP服务器，其他电脑无法访问？
⑤ Python中FTP 上传出现10060错误，怎么解决
连接类型
2.FTP服务器故障
3.端口
试下用ACTV mode看看？
ftp.set_pasv(False)
⑥ ftp文件夹错误 无法解析服务器的名称和地址
无法解析服务器的名称和地址，明显的是DNS故障了。
如果是空间商的问题，应该是提示到目标地址无法链接。
两回事。
⑦ python ftp permission denied怎么解决
FTP 550 Permission denied 只能建文件夹，没法删除及上传文件的解决方法，需要的朋友可以参考下。
出现这种问题，
①首先检查用户对应的角色名，然后看路径设置是否正确，有没有相关的权限，如果这些都没问题，然后就尝试下面的操作：
②重起FTP服务，最好从服务里面重启(不能根本解决)；
③重新设置Server-U帐号和目录访问里的文件路径(如果还不行，尝试下面操作)；
④删除用户，重新建。
原创 SU整理（FTP)收藏
整理如下：
1开头-成功
2开头-成功
3开头-权限问题
4开头-文件问题
5开头-服务器问题
150 FILE: %s
150 Opening %s mode data connection for %s (%I64d Bytes).
150 Opening %s mode data connection for %s.
150 Opening ASCII mode data connection for /bin/ls.
150 Opening BINARY mode data connection for MLSD.
200 (end of 'index %s')
200 Command channel switched to clear-text.
200 Command OK, %I64d Bytes available on %s
200 Command okay.
200 EXEC command successful (TID=%u).
200 Message received okay.
200 MLST OPTS
200 MODE S ok.
200 MODE Z LEVEL set to %d.
200 MODE Z ok.
200 Noted.
200 Opened OK (but not really).
200 PBSZ command OK. Protection buffer size set to 0.
200 PBSZ=0
200 PORT Command successful.
200 PROT command OK. Using clear data connection.
200 PROT command OK. Using private data connection.
200 SSCN:CLIENT METHOD
200 SSCN:SERVER METHOD
200 STRU F ok.
200 STRU R ok.
200 Transfer progress notification is off.
200 Transfer progress notification is on.
200 Type set to A.
200 Type set to I.
202 Command not implemented, superfluous at this site.
202 Command not implemented, superfluous at this site.
210 UTC%+ld
211 End
211 End of status.
211-Extension supported
211-Status for user %Name from %IP:
213 %I64d
213 %s
214 Direct comments or bugs to [email protected].
214- The following commands are recognized (* => unimplemented).
215 UNIX Type: L8
220 Service ready for new user.
220 Serv-U FTP Server v%s for WinSock ready...
221 Goodbye!
226 ABOR command successful.
226 Transfer complete.
226 Transfer complete.
226 Transfer complete.
227 Entering Passive Mode (%d,%d,%d,%d,%d,%d)
230 Password changed okay.
230 Switching to SYSTEM MAINTENANCE mode.
230 User logged in, proceed.
230 User logged in.
231 Switching to GROUP MAINTENANCE mode.
232 Switching to DOMAIN MAINTENANCE mode.
233 Switching to READ-ONLY MAINTENANCE mode.
233 User logged in, PASSWORD EXPIRED - please change before proceeding.
234 AUTH command OK. Already have SSL connection.
234 AUTH command OK. Initializing SSL connection.
250 %X
250 DELE command successful.
250 Directory changed to %s
250 End.
250 RMD command successful.
250 RNTO command successful.
250-Listing %s
253 Attributes changed okay.
253 Date/time changed okay.
257 "%s" directory created.
257 "%s" is current directory.
321 Transferred %I64d Bytes.
331 Response to otp-md%d %u %s required for skey.
331 User name okay, need password.
331 User name okay, please send complete E-mail address as password.
350 File or directory exists, ready for destination name
350 Restarting at %I64d. Send STORE or RETRIEVE.
421 Data connection closed (SSL/TLS negotiation failed).
421 Service closing control connection.
425 Cannot open data connection.
425 Cannot open data connection.
425 Cannot open data connection.
425 Try later, data connection in use.
425 Try later, data connection in use.
425 Try later, data connection in use.
425 Try later, out of network sockets.
425 Try later, out of network sockets.
425 Try later, out of network sockets.
425 Unable to listen, too many pending PASV requests from same client IP.
425 Unable to set up passive listening socket.
426 Data connection closed, cannot read file %s.
426 Data connection closed, cannot write file %s - disk full?
426 Data connection closed, error compressing data stream.
426 Data connection closed, error decompressing data stream.
426 Data connection closed, file transfer %s aborted by client.
426 Data connection closed, file transfer %s aborted.
426 Data connection closed, receive file %s aborted.
426 Data connection closed, transfer aborted.
426 Transfer aborted.
431 Account temporarily locked for other user, please try later.
431 Password not changed, no match for old password.
431 Unable to negotiate secure command connection.
432 Password not changed, new password should be at least %d characters in length.
432 Password not changed, new password should contain at least one upper-case character and symbol
432 Password not changed, old and new passwords cannot be identical.
450 Cannot open file %s for reading.
452 Sorry, insufficient disk quota - receive file %s aborted.
500 '%s': command not understood.
501 %s: Not a directory.
501 Cannot EXEC command line (error=%u).
501 Invalid MLST options
501 Invalid option.
501 Not enough space, only %I64d Bytes available on drive %s
501 Permission denied.
501 SITE option not supported.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Wildcards not allowed.
502 Syntax error - use SITE PSWD "<oldpassword>" "<newpassword>".
503 Bad sequence of commands.
503 Bad sequence of commands.
503 Secure command connection required prior to PBSZ command.
503 Secure command connection required prior to PROT command.
504 Command not implemented for that parameter.
504 Command not implemented for that parameter.
504 Command not implemented for that parameter.
504 Unknown security mechanism.
510 Cannot determine server time zone.
521 Data connection cannot be opened with this PROT setting.
522 SSL/TLS lib refuses to initiate secure data connection.
530 Cannot change Anonymous password.
530 Cannot change password.
530 Not logged in, cannot find home directory.
530 Not logged in, home directory does not exist.
⑧ FTP问题，详细信息：无法解析服务器的名称或地址
空间配置问题或者域名解析问题
1、地址处试试写服务器的IP地址，而不是域名。如果可以的话就是域名还没解析到服务器
2、如果也不行的话，服务器的问题。