des解密php
作者/上善若水
1.md5(string $str,bool $flag = false);
$flag = false 默認返回32位的16進至數據散列值
$flag = true 返回原始流數據
2.sha1($string,$flag = false)
$flag = false 默認返回40位的16進至數據散列值
true 返回原始流數據
3.hash(string $algo,srting $str,bool $flag);
$algo : 演算法名稱，可通過hash_algos()函數獲取所有hash加密的演算法
如：md5,sha1等，採用md5,sha1加密所得結果和1,2兩種方式結 果相同。
$flag = false 默認返回16進至的數據散列值，具體長度根據演算法不同
而不同。
true 返回原始流數據。
4.crypt(string $str,$string $salt)；
函數返回使用 DES、Blowfish 或 MD5 演算法加密的字元串。
具體演算法依賴於PHP檢查之後支持的演算法和$salt的格式和長度，當 然具體結果也和操作系統有關。比較結果採用 hash_equals($crypted,crypt($input,$salt));//且salt值相同
Password_verify($str,$crypted);
5.password_hash ( string $str, integer $algo [, array $options ] )
函數返回哈希加密後的密碼字元串， password_hash() 是crypt()的 一個簡單封裝
$algo : 演算法 PASSWORD_DEFAULT ，PASSWORD_BCRYPT
$options = [
「cost」=>10，//指明演算法遞歸的層數,
「salt」=>「xxadasdsad」//加密鹽值，即將被遺 棄，採用系統自動隨機生成安全性更高
]；
使用的演算法、cost 和鹽值作為哈希的一部分返回
Password_verify($str,$hashed);
6.base64_encode(string $str)
設計此種編碼是為了使二進制數據可以通過非純 8-bit 的傳輸層 傳輸，例如電子郵件的主體。base64_decode(string $encoded)
可以進行解碼;
7.mcrypt_encrypt ( string $cipher , string $key , string $data ,
string $mode [, string $iv ] )
mcrypt_decrypt ( string $cipher , string $key , string $crypted ,
string $mode [, string $iv ] )
$ciper:加密演算法，mcrypt_list_algorithms()可以獲取該函數所有支持的演算法
如MCRYPT_DES(「des」),MCRYPT_RIJNDAEL_128(「rijndael-128」);
$mode : 加密模式 ，mcrypt_list_modes()獲取所有支持的加密模式，ecb,cbc
$key: 加密的秘鑰，mcrypt_get_key_size ( string $cipher , string $mode )
獲取指定的演算法和模式所需的密鑰長度。$key要滿足這個長度，如果長 度無效會報出警告。
$iv : 加密的初始向量，可通過mcrypt_create_iv ( int $size [, int $source = MCRYPT_DEV_URANDOM ] )，
Iv的參數size：
通過mcrypt_get_iv_size ( string $cipher , string $mode )獲取
Iv 的參數source：
初始向量數據來源。可選值有： MCRYPT_RAND （系統隨機數生成 器）, MCRYPT_DEV_RANDOM （從 /dev/random 文件讀取數據） 和 MCRYPT_DEV_URANDOM （從 /dev/urandom 文件讀取數據）。 在 Windows 平台，PHP 5.3.0 之前的版本中，僅支持 MCRYPT_RAND。
請注意，在 PHP 5.6.0 之前的版本中， 此參數的默認值 為 MCRYPT_DEV_RANDOM。
Note: 需要注意的是，如果沒有更多可用的用來產生隨機數據的信息， 那麼 MCRYPT_DEV_RANDOM 可能進入阻塞狀態。
$data : 要加密的字元串數據
Ⅱ 用PHP的方法解DES加密
<?php
$key='LY870513';
$ctext='j45Rrzxm0jD62U1w798yBg==';
$ptext=mcrypt_decrypt(MCRYPT_DES,$key,base64_decode($ctext),MCRYPT_MODE_CBC,"x12x34x56120x90xabxcdxef");
//echoiconv('UTF-8','GBK',$ptext);//GBK環境使用，UTF8環境多餘不用
echo$ptext;//UTF8環境用
202 19241337
由於不清楚原代碼的塊鏈接模式，暫時用的CBC，對於短數據可解出。
Ⅲ php 代碼解密
其實你可以使用DES進行解密，php中有一個擴展可以支持DES的加密演算法，是：extension=php_mcrypt.dll在配置文件中將這個擴展打開還不能夠在windows環境下使用需要將PHP文件夾下的 libmcrypt.dll 拷貝到系統的 system32 目錄下，這是通過phpinfo可以查看到mcrypt表示這個模塊可以正常試用了。
我舉例一下吧：
function do_mdecrypt($input, $key)
{
$input = str_replace(""n", "", $input);
$input = str_replace(""t", "", $input);
$input = str_replace(""r", "", $input);
$input = trim(chop(base64_decode($input)));
$td = mcrypt_mole_open('tripledes', '', 'ecb', '');
$key = substr(md5($key), 0, 24);
$iv = mcrypt_create_iv(mcrypt_enc_get_iv_size($td), MCRYPT_RAND);
mcrypt_generic_init($td, $key, $iv);
$decrypted_data = mdecrypt_generic($td, $input);
mcrypt_generic_deinit($td);
mcrypt_mole_close($td);
return trim(chop($decrypted_data));
}
然後，你用用這個方法，就可以實現代碼解密了！
Ⅳ php的des加密用js解密解除亂碼，發現2個加密出的東西不一樣
JS加密和PHP加密是不同的，雖然都是md5加密，所以你不能直接判斷js加密和PHP加密是否相等，畢竟是兩種語言，要麼都用js的加密，要麼都是PHP的
Ⅳ 求 js和PHP版的 DES加解密程序
php: http://jingyan..com/article/358570f67135b6ce4624fc4a.html
js:http://www.cnblogs.com/qiongmiaoer/p/3573474.html
Ⅵ java進行3des加密傳過來的數據，php怎麼解密
<?php
/**
* 3DES加解密類
* @Author: 黎志斌
* @version: v1.0
* 2016年7月21日
*/
class Encrypt
{
//加密秘鑰，
private $_key;
private $_iv;
public function __construct($key, $iv)
{
$this->_key = $key;
$this->_iv = $iv;
}
/**
* 對字元串進行3DES加密
* @param string 要加密的字元串
* @return mixed 加密成功返回加密後的字元串，否則返回false
*/
public function encrypt3DES($str)
{
$td = mcrypt_mole_open(MCRYPT_3DES, "", MCRYPT_MODE_CBC, "");
if ($td === false) {
return false;
}
//檢查加密key，iv的長度是否符合演算法要求
$key = $this->fixLen($this->_key, mcrypt_enc_get_key_size($td));
$iv = $this->fixLen($this->_iv, mcrypt_enc_get_iv_size($td));
//加密數據長度處理
$str = $this->strPad($str, mcrypt_enc_get_block_size($td));
if (mcrypt_generic_init($td, $key, $iv) !== 0) {
return false;
}
$result = mcrypt_generic($td, $str);
mcrypt_generic_deinit($td);
mcrypt_mole_close($td);
return $result;
}
/**
* 對加密的字元串進行3DES解密
* @param string 要解密的字元串
* @return mixed 加密成功返回加密後的字元串，否則返回false
*/
public function decrypt3DES($str)
{
$td = mcrypt_mole_open(MCRYPT_3DES, "", MCRYPT_MODE_CBC, "");
if ($td === false) {
return false;
}
//檢查加密key，iv的長度是否符合演算法要求
$key = $this->fixLen($this->_key, mcrypt_enc_get_key_size($td));
$iv = $this->fixLen($this->_iv, mcrypt_enc_get_iv_size($td));
if (mcrypt_generic_init($td, $key, $iv) !== 0) {
return false;
}
$result = mdecrypt_generic($td, $str);
mcrypt_generic_deinit($td);
mcrypt_mole_close($td);
return $this->strUnPad($result);
}
/**
* 返回適合演算法長度的key，iv字元串
* @param string $str key或iv的值
* @param int $td_len 符合條件的key或iv長度
* @return string 返回處理後的key或iv值
*/
private function fixLen($str, $td_len)
{
$str_len = strlen($str);
if ($str_len > $td_len) {
return substr($str, 0, $td_len);
} else if($str_len < $td_len) {
return str_pad($str, $td_len, '0');
}
return $str;
}
/**
* 返回適合演算法的分組大小的字元串長度，末尾使用\0補齊
* @param string $str 要加密的字元串
* @param int $td_group_len 符合演算法的分組長度
* @return string 返回處理後字元串
*/
private function strPad($str, $td_group_len)
{
$padding_len = $td_group_len - (strlen($str) % $td_group_len);
return str_pad($str, strlen($str) + $padding_len, "\0");
}
/**
* 返回適合演算法的分組大小的字元串長度，末尾使用\0補齊
* @param string $str 要加密的字元串
* @return string 返回處理後字元串
*/
private function strUnPad($str)
{
return rtrim($str);
}
}
$key = 'ABCEDFGHIJKLMNOPQ';
$iv = '0123456789';
$des = new Encrypt($key, $iv);
$str = "abcdefghijklmnopq";
echo "source: {$str},len: ",strlen($str),"\r\n";
$e_str = $des->encrypt3DES($str);
echo "entrypt: ", $e_str, "\r\n";
$d_str = $des->decrypt3DES($e_str);
echo "dntrypt: {$d_str},len: ",strlen($d_str),"\r\n";
Ⅶ 80分求DES加密解密演算法實現的PHP源代碼
以下演算法根據js演算法移植：
<?php
function des ($key, $message, $encrypt, $mode, $iv, $padding) {
$message0 = $message;
//declaring this locally speeds things up a bit
$spfunction1 = array (0x1010400,0,0x10000,0x1010404,0x1010004,0x10404,0x4,0x10000,0x400,0x1010400,0x1010404,0x400,0x1000404,0x1010004,0x1000000,0x4,0x404,0x1000400,0x1000400,0x10400,0x10400,0x1010000,0x1010000,0x1000404,0x10004,0x1000004,0x1000004,0x10004,0,0x404,0x10404,0x1000000,0x10000,0x1010404,0x4,0x1010000,0x1010400,0x1000000,0x1000000,0x400,0x1010004,0x10000,0x10400,0x1000004,0x400,0x4,0x1000404,0x10404,0x1010404,0x10004,0x1010000,0x1000404,0x1000004,0x404,0x10404,0x1010400,0x404,0x1000400,0x1000400,0,0x10004,0x10400,0,0x1010004);
$spfunction2 = array (-0x7fef7fe0,-0x7fff8000,0x8000,0x108020,0x100000,0x20,-0x7fefffe0,-0x7fff7fe0,-0x7fffffe0,-0x7fef7fe0,-0x7fef8000,-0x80000000,-0x7fff8000,0x100000,0x20,-0x7fefffe0,0x108000,0x100020,-0x7fff7fe0,0,-0x80000000,0x8000,0x108020,-0x7ff00000,0x100020,-0x7fffffe0,0,0x108000,0x8020,-0x7fef8000,-0x7ff00000,0x8020,0,0x108020,-0x7fefffe0,0x100000,-0x7fff7fe0,-0x7ff00000,-0x7fef8000,0x8000,-0x7ff00000,-0x7fff8000,0x20,-0x7fef7fe0,0x108020,0x20,0x8000,-0x80000000,0x8020,-0x7fef8000,0x100000,-0x7fffffe0,0x100020,-0x7fff7fe0,-0x7fffffe0,0x100020,0x108000,0,-0x7fff8000,0x8020,-0x80000000,-0x7fefffe0,-0x7fef7fe0,0x108000);
$spfunction3 = array (0x208,0x8020200,0,0x8020008,0x8000200,0,0x20208,0x8000200,0x20008,0x8000008,0x8000008,0x20000,0x8020208,0x20008,0x8020000,0x208,0x8000000,0x8,0x8020200,0x200,0x20200,0x8020000,0x8020008,0x20208,0x8000208,0x20200,0x20000,0x8000208,0x8,0x8020208,0x200,0x8000000,0x8020200,0x8000000,0x20008,0x208,0x20000,0x8020200,0x8000200,0,0x200,0x20008,0x8020208,0x8000200,0x8000008,0x200,0,0x8020008,0x8000208,0x20000,0x8000000,0x8020208,0x8,0x20208,0x20200,0x8000008,0x8020000,0x8000208,0x208,0x8020000,0x20208,0x8,0x8020008,0x20200);
$spfunction4 = array (0x802001,0x2081,0x2081,0x80,0x802080,0x800081,0x800001,0x2001,0,0x802000,0x802000,0x802081,0x81,0,0x800080,0x800001,0x1,0x2000,0x800000,0x802001,0x80,0x800000,0x2001,0x2080,0x800081,0x1,0x2080,0x800080,0x2000,0x802080,0x802081,0x81,0x800080,0x800001,0x802000,0x802081,0x81,0,0,0x802000,0x2080,0x800080,0x800081,0x1,0x802001,0x2081,0x2081,0x80,0x802081,0x81,0x1,0x2000,0x800001,0x2001,0x802080,0x800081,0x2001,0x2080,0x800000,0x802001,0x80,0x800000,0x2000,0x802080);
$spfunction5 = array (0x100,0x2080100,0x2080000,0x42000100,0x80000,0x100,0x40000000,0x2080000,0x40080100,0x80000,0x2000100,0x40080100,0x42000100,0x42080000,0x80100,0x40000000,0x2000000,0x40080000,0x40080000,0,0x40000100,0x42080100,0x42080100,0x2000100,0x42080000,0x40000100,0,0x42000000,0x2080100,0x2000000,0x42000000,0x80100,0x80000,0x42000100,0x100,0x2000000,0x40000000,0x2080000,0x42000100,0x40080100,0x2000100,0x40000000,0x42080000,0x2080100,0x40080100,0x100,0x2000000,0x42080000,0x42080100,0x80100,0x42000000,0x42080100,0x2080000,0,0x40080000,0x42000000,0x80100,0x2000100,0x40000100,0x80000,0,0x40080000,0x2080100,0x40000100);
$spfunction6 = array (0x20000010,0x20400000,0x4000,0x20404010,0x20400000,0x10,0x20404010,0x400000,0x20004000,0x404010,0x400000,0x20000010,0x400010,0x20004000,0x20000000,0x4010,0,0x400010,0x20004010,0x4000,0x404000,0x20004010,0x10,0x20400010,0x20400010,0,0x404010,0x20404000,0x4010,0x404000,0x20404000,0x20000000,0x20004000,0x10,0x20400010,0x404000,0x20404010,0x400000,0x4010,0x20000010,0x400000,0x20004000,0x20000000,0x4010,0x20000010,0x20404010,0x404000,0x20400000,0x404010,0x20404000,0,0x20400010,0x10,0x4000,0x20400000,0x404010,0x4000,0x400010,0x20004010,0,0x20404000,0x20000000,0x400010,0x20004010);
$spfunction7 = array (0x200000,0x4200002,0x4000802,0,0x800,0x4000802,0x200802,0x4200800,0x4200802,0x200000,0,0x4000002,0x2,0x4000000,0x4200002,0x802,0x4000800,0x200802,0x200002,0x4000800,0x4000002,0x4200000,0x4200800,0x200002,0x4200000,0x800,0x802,0x4200802,0x200800,0x2,0x4000000,0x200800,0x4000000,0x200800,0x200000,0x4000802,0x4000802,0x4200002,0x4200002,0x2,0x200002,0x4000000,0x4000800,0x200000,0x4200800,0x802,0x200802,0x4200800,0x802,0x4000002,0x4200802,0x4200000,0x200800,0,0x2,0x4200802,0,0x200802,0x4200000,0x800,0x4000002,0x4000800,0x800,0x200002);
$spfunction8 = array (0x10001040,0x1000,0x40000,0x10041040,0x10000000,0x10001040,0x40,0x10000000,0x40040,0x10040000,0x10041040,0x41000,0x10041000,0x41040,0x1000,0x40,0x10040000,0x10000040,0x10001000,0x1040,0x41000,0x40040,0x10040040,0x10041000,0x1040,0,0,0x10040040,0x10000040,0x10001000,0x41040,0x40000,0x41040,0x40000,0x10041000,0x1000,0x40,0x10040040,0x1000,0x41040,0x10001000,0x40,0x10000040,0x10040000,0x10040040,0x10000000,0x40000,0x10001040,0,0x10041040,0x40040,0x10000040,0x10040000,0x10001000,0x10001040,0,0x10041040,0x41000,0x41000,0x1040,0x1040,0x40040,0x10000000,0x10041000);
$masks = array (4294967295,2147483647,1073741823,536870911,268435455,134217727,67108863,33554431,16777215,8388607,4194303,2097151,1048575,524287,262143,131071,65535,32767,16383,8191,4095,2047,1023,511,255,127,63,31,15,7,3,1,0);
//create the 16 or 48 subkeys we will need
$keys = des_createKeys ($key);
$m=0;
$len = strlen($message);
//如果加密，則需要填充
if($encrypt==1){
if($len%8==1){
for($i=0;$i<7;$i++)
$message.=chr(7);
}
if($len%8==2){
for($i=0;$i<6;$i++)
$message.=chr(6);
}
if($len%8==3){
for($i=0;$i<5;$i++)
$message.=chr(5);
}
if($len%8==4){
for($i=0;$i<4;$i++)
$message.=chr(4);
}
if($len%8==5){
for($i=0;$i<3;$i++)
$message.=chr(3);
}
if($len%8==6){
for($i=0;$i<2;$i++)
$message.=chr(2);
}
if($len%8==7){
for($i=0;$i<1;$i++)
$message.=chr(1);
}
if($len%8==0){
for($i=0;$i<8;$i++)
$message.=chr(8);
$len = $len + 8;
}
}
echo "message:".$message;
echo "<br>";
$chunk = 0;
//set up the loops for single and triple des
$iterations = ((count($keys) == 32) ? 3 : 9); //single or triple des
if ($iterations == 3) {$looping = (($encrypt) ? array (0, 32, 2) : array (30, -2, -2));}
else {$looping = (($encrypt) ? array (0, 32, 2, 62, 30, -2, 64, 96, 2) : array (94, 62, -2, 32, 64, 2, 30, -2, -2));}
echo "3.iterations".$iterations;
echo "<br> 4.looping:";
for($ii = 0; $ii < count($looping); $ii++){
echo ",".$looping[$ii];
}
echo "<br>";
//pad the message depending on the padding parameter
// if ($padding == 2) $message .= " "; //pad the message with spaces
// else if ($padding == 1) {$temp = chr (8-($len%8)); $message .= $temp . $temp . $temp . $temp . $temp . $temp . $temp . $temp; if ($temp==8) $len+=8;} //PKCS7 padding
// else if (!$padding) $message .= (chr(0) . chr(0) . chr(0) . chr(0) . chr(0) . chr(0) . chr(0) . chr(0)); //pad the message out with null bytes
//store the result here
$result = "";
$tempresult = "";
if ($mode == 1) { //CBC mode
$cbcleft = (ord($iv{$m++}) << 24) | (ord($iv{$m++}) << 16) | (ord($iv{$m++}) << 8) | ord($iv{$m++});
$cbcright = (ord($iv{$m++}) << 24) | (ord($iv{$m++}) << 16) | (ord($iv{$m++}) << 8) | ord($iv{$m++});
$m=0;
}
echo "mode:".$mode;
echo "<br>";
echo "5.cbcleft:".$cbcleft;
echo "<br>";
echo "6.cbcright:".$cbcright;
echo "<br>";
//loop through each 64 bit chunk of the message
while ($m < $len) {
$left = (ord($message{$m++}) << 24) | (ord($message{$m++}) << 16) | (ord($message{$m++}) << 8) | ord($message{$m++});
$right = (ord($message{$m++}) << 24) | (ord($message{$m++}) << 16) | (ord($message{$m++}) << 8) | ord($message{$m++});
//for Cipher Block Chaining mode, xor the message with the previous result
if ($mode == 1) {if ($encrypt) {$left ^= $cbcleft; $right ^= $cbcright;} else {$cbcleft2 = $cbcleft; $cbcright2 = $cbcright; $cbcleft = $left; $cbcright = $right;}}
//first each 64 but chunk of the message must be permuted according to IP
$temp = (($left >> 4 & $masks[4]) ^ $right) & 0x0f0f0f0f; $right ^= $temp; $left ^= ($temp << 4);
$temp = (($left >> 16 & $masks[16]) ^ $right) & 0x0000ffff; $right ^= $temp; $left ^= ($temp << 16);
$temp = (($right >> 2 & $masks[2]) ^ $left) & 0x33333333; $left ^= $temp; $right ^= ($temp << 2);
$temp = (($right >> 8 & $masks[8]) ^ $left) & 0x00ff00ff; $left ^= $temp; $right ^= ($temp << 8);
$temp = (($left >> 1 & $masks[1]) ^ $right) & 0x55555555; $right ^= $temp; $left ^= ($temp << 1);
$left = (($left << 1) | ($left >> 31 & $masks[31]));
$right = (($right << 1) | ($right >> 31 & $masks[31]));
//do this either 1 or 3 times for each chunk of the message
for ($j=0; $j<$iterations; $j+=3) {
$endloop = $looping[$j+1];
$loopinc = $looping[$j+2];
//now go through and perform the encryption or decryption
for ($i=$looping[$j]; $i!=$endloop; $i+=$loopinc) { //for efficiency
$right1 = $right ^ $keys[$i];
$right2 = (($right >> 4 & $masks[4]) | ($right << 28 & 0xffffffff)) ^ $keys[$i+1];
//the result is attained by passing these bytes through the S selection functions
$temp = $left;
$left = $right;
$right = $temp ^ ($spfunction2[($right1 >> 24 & $masks[24]) & 0x3f] | $spfunction4[($right1 >> 16 & $masks[16]) & 0x3f]
| $spfunction6[($right1 >> 8 & $masks[8]) & 0x3f] | $spfunction8[$right1 & 0x3f]
| $spfunction1[($right2 >> 24 & $masks[24]) & 0x3f] | $spfunction3[($right2 >> 16 & $masks[16]) & 0x3f]
| $spfunction5[($right2 >> 8 & $masks[8]) & 0x3f] | $spfunction7[$right2 & 0x3f]);
}
$temp = $left; $left = $right; $right = $temp; //unreverse left and right
} //for either 1 or 3 iterations
//move then each one bit to the right
$left = (($left >> 1 & $masks[1]) | ($left << 31));
$right = (($right >> 1 & $masks[1]) | ($right << 31));
//now perform IP-1, which is IP in the opposite direction
$temp = (($left >> 1 & $masks[1]) ^ $right) & 0x55555555; $right ^= $temp; $left ^= ($temp << 1);
$temp = (($right >> 8 & $masks[8]) ^ $left) & 0x00ff00ff; $left ^= $temp; $right ^= ($temp << 8);
$temp = (($right >> 2 & $masks[2]) ^ $left) & 0x33333333; $left ^= $temp; $right ^= ($temp << 2);
$temp = (($left >> 16 & $masks[16]) ^ $right) & 0x0000ffff; $right ^= $temp; $left ^= ($temp << 16);
$temp = (($left >> 4 & $masks[4]) ^ $right) & 0x0f0f0f0f; $right ^= $temp; $left ^= ($temp << 4);
//for Cipher Block Chaining mode, xor the message with the previous result
if ($mode == 1) {if ($encrypt) {$cbcleft = $left; $cbcright = $right;} else {$left ^= $cbcleft2; $right ^= $cbcright2;}}
$tempresult .= (chr($left>>24 & $masks[24]) . chr(($left>>16 & $masks[16]) & 0xff) . chr(($left>>8 & $masks[8]) & 0xff) . chr($left & 0xff) . chr($right>>24 & $masks[24]) . chr(($right>>16 & $masks[16]) & 0xff) . chr(($right>>8 & $masks[8]) & 0xff) . chr($right & 0xff));
$chunk += 8;
if ($chunk == 512) {$result .= $tempresult; $tempresult = ""; $chunk = 0;}
} //for every 8 characters, or 64 bits in the message
//return the result as an array
return ($result . $tempresult);
} //end of des
//des_createKeys
//this takes as input a 64 bit key (even though only 56 bits are used)
//as an array of 2 integers, and returns 16 48 bit keys
function des_createKeys ($key) {
//declaring this locally speeds things up a bit
$pc2bytes0 = array (0,0x4,0x20000000,0x20000004,0x10000,0x10004,0x20010000,0x20010004,0x200,0x204,0x20000200,0x20000204,0x10200,0x10204,0x20010200,0x20010204);
$pc2bytes1 = array (0,0x1,0x100000,0x100001,0x4000000,0x4000001,0x4100000,0x4100001,0x100,0x101,0x100100,0x100101,0x4000100,0x4000101,0x4100100,0x4100101);
$pc2bytes2 = array (0,0x8,0x800,0x808,0x1000000,0x1000008,0x1000800,0x1000808,0,0x8,0x800,0x808,0x1000000,0x1000008,0x1000800,0x1000808);
$pc2bytes3 = array (0,0x200000,0x8000000,0x8200000,0x2000,0x202000,0x8002000,0x8202000,0x20000,0x220000,0x8020000,0x8220000,0x22000,0x222000,0x8022000,0x8222000);
$pc2bytes4 = array (0,0x40000,0x10,0x40010,0,0x40000,0x10,0x40010,0x1000,0x41000,0x1010,0x41010,0x1000,0x41000,0x1010,0x41010);
$pc2bytes5 = array (0,0x400,0x20,0x420,0,0x400,0x20,0x420,0x2000000,0x2000400,0x2000020,0x2000420,0x2000000,0x2000400,0x2000020,0x2000420);
$pc2bytes6 = array (0,0x10000000,0x80000,0x10080000,0x2,0x10000002,0x80002,0x10080002,0,0x10000000,0x80000,0x10080000,0x2,0x10000002,0x80002,0x10080002);
$pc2bytes7 = array (0,0x10000,0x800,0x10800,0x20000000,0x20010000,0x20000800,0x20010800,0x20000,0x30000,0x20800,0x30800,0x20020000,0x20030000,0x20020800,0x20030800);
$pc2bytes8 = array (0,0x40000,0,0x40000,0x2,0x40002,0x2,0x40002,0x2000000,0x2040000,0x2000000,0x2040000,0x2000002,0x2040002,0x2000002,0x2040002);
$pc2bytes9 = array (0,0x10000000,0x8,0x10000008,0,0x10000000,0x8,0x10000008,0x400,0x10000400,0x408,0x10000408,0x400,0x10000400,0x408,0x10000408);
$pc2bytes10 = array (0,0x20,0,0x20,0x100000,0x100020,0x100000,0x100020,0x2000,0x2020,0x2000,0x2020,0x102000,0x102020,0x102000,0x102020);
$pc2bytes11 = array (0,0x1000000,0x200,0x1000200,0x200000,0x1200000,0x200200,0x1200200,0x4000000,0x5000000,0x4000200,0x5000200,0x4200000,0x5200000,0x4200200,0x5200200);
$pc2bytes12 = array (0,0x1000,0x8000000,0x8001000,0x80000,0x81000,0x8080000,0x8081000,0x10,0x1010,0x8000010,0x8001010,0x80010,0x81010,0x8080010,0x8081010);
$pc2bytes13 = array (0,0x4,0x100,0x104,0,0x4,0x100,0x104,0x1,0x5,0x101,0x105,0x1,0x5,0x101,0x105);
$masks = array (4294967295,2147483647,1073741823,536870911,268435455,134217727,67108863,33554431,16777215,8388607,4194303,2097151,1048575,524287,262143,131071,65535,32767,16383,8191,4095,2047,1023,511,255,127,63,31,15,7,3,1,0);
//how many iterations (1 for des, 3 for triple des)
// $iterations = ((strlen($key) > 8) ? 3 : 1); //changed by Paul 16/6/2007 to use Triple DES for 9+ byte keys
$iterations = ((strlen($key) > 24) ? 3 : 1); //changed by Paul 16/6/2007 to use Triple DES for 9+ byte keys
//stores the return keys
$keys = array (); // size = 32 * iterations but you don't specify this in php
//now define the left shifts which need to be done
$shifts = array (0, 0, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 0);
//other variables
$m=0;
$n=0;
for ($j=0; $j<$iterations; $j++) { //either 1 or 3 iterations
$left = (ord($key{$m++}) << 24) | (ord($key{$m++}) << 16) | (ord($key{$m++}) << 8) | ord($key{$m++});
$right = (ord($key{$m++}) << 24) | (ord($key{$m++}) << 16) | (ord($key{$m++}) << 8) | ord($key{$m++});
$temp = (($left >> 4 & $masks[4]) ^ $right) & 0x0f0f0f0f; $right ^= $temp; $left ^= ($temp << 4);
$temp = (($right >> 16 & $masks[16]) ^ $left) & 0x0000ffff; $left ^= $temp; $right ^= ($temp << 16);
$temp = (($left >> 2 & $masks[2]) ^ $right) & 0x33333333; $right ^= $temp; $left ^= ($temp << 2);
$temp = (($right >> 16 & $masks[16]) ^ $left) & 0x0000ffff; $left ^= $temp; $right ^= ($temp << 16);
$temp = (($left >> 1 & $masks[1]) ^ $right) & 0x55555555; $right ^= $temp; $left ^= ($temp << 1);
$temp = (($right >> 8 & $masks[8]) ^ $left) & 0x00ff00ff; $left ^= $temp; $right ^= ($temp << 8);
$temp = (($left >> 1 & $masks[1]) ^ $right) & 0x55555555; $right ^= $temp; $left ^= ($temp << 1);
//the right side needs to be shifted and to get the last four bits of the left side
$temp = ($left << 8) | (($right >> 20 & $masks[20]) & 0x000000f0);
//left needs to be put upside down
$left = ($right << 24) | (($right << 8) & 0xff0000) | (($right >> 8 & $masks[8]) & 0xff00) | (($right >> 24 & $masks[24]) & 0xf0);
$right = $temp;
//now go through and perform these shifts on the left and right keys
for ($i=0; $i < count($shifts); $i++) {
//shift the keys either one or two bits to the left
if ($shifts[$i] > 0) {
$left = (($left << 2) | ($left >> 26 & $masks[26]));
$right = (($right << 2) | ($right >> 26 & $masks[26]));
} else {
$left = (($left << 1) | ($left >> 27 & $masks[27]));
$right = (($right << 1) | ($right >> 27 & $masks[27]));
}
$left = $left & -0xf;
$right = $right & -0xf;
//now apply PC-2, in such a way that E is easier when encrypting or decrypting
//this conversion will look like PC-2 except only the last 6 bits of each byte are used
//rather than 48 consecutive bits and the order of lines will be according to
//how the S selection functions will be applied: S2, S4, S6, S8, S1, S3, S5, S7
$lefttemp = $pc2bytes0[$left >> 28 & $masks[28]] | $pc2bytes1[($left >> 24 & $masks[24]) & 0xf]
| $pc2bytes2[($left >> 20 & $masks[20]) & 0xf] | $pc2bytes3[($left >> 16 & $masks[16]) & 0xf]
| $pc2bytes4[($left >> 12 & $masks[12]) & 0xf] | $pc2bytes5[($left >> 8 & $masks[8]) & 0xf]
| $pc2bytes6[($left >> 4 & $masks[4]) & 0xf];
$righttemp = $pc2bytes7[$right >> 28 & $masks[28]] | $pc2bytes8[($right >> 24 & $masks[24]) & 0xf]
| $pc2bytes9[($right >> 20 & $masks[20]) & 0xf] | $pc2bytes10[($right >> 16 & $masks[16]) & 0xf]
| $pc2bytes11[($right >> 12 & $masks[12]) & 0xf] | $pc2bytes12[($right >> 8 & $masks[8]) & 0xf]
| $pc2bytes13[($right >> 4 & $masks[4]) & 0xf];
$temp = (($righttemp >> 16 & $masks[16]) ^ $lefttemp) & 0x0000ffff;
$keys[$n++] = $lefttemp ^ $temp; $keys[$n++] = $righttemp ^ ($temp << 16);
}
} //for each iterations
//return the keys we've created
for($ii = 0; $ii < count($keys); $ii++){
echo ",".$keys[$ii];
}
echo "<br>";
return $keys;
} //end of des_createKeys
////////////////////////////// TEST //////////////////////////////
function stringToHex ($s) {
$r = "0x";
$hexes = array ("0","1","2","3","4","5","6","7","8","9","a","b","c","d","e","f");
for ($i=0; $i<strlen($s); $i++) {$r .= ($hexes [(ord($s{$i}) >> 4)] . $hexes [(ord($s{$i}) & 0xf)]);}
return $r;
}
function hexToString ($h) {
$r = "";
for ($i= (substr($h, 0, 2)=="0x")?2:0; $i<strlen($h); $i+=2) {$r .= chr (base_convert (substr ($h, $i, 2), 16, 10));}
return $r;
}
function idtag_des_encode($text)
{
$key = '12345678';
$y=pkcs5_pad($text);
echo "y:".$y;
echo "<br />";
$td = mcrypt_mole_open(MCRYPT_DES,'',MCRYPT_MODE_CBC,''); //使用MCRYPT_DES演算法,cbc模式
$iv = mcrypt_create_iv(mcrypt_enc_get_iv_size($td), MCRYPT_RAND);
$ks = mcrypt_enc_get_key_size($td);
mcrypt_generic_init($td, $key, $key); //初始處理
$encrypted = mcrypt_generic($td, $y); //解密
mcrypt_generic_deinit($td); //結束
mcrypt_mole_close($td);
return $encrypted;
// return base64_encode($encrypted);
}
function pkcs5_pad($text,$block=8)
{
$pad = $block - (strlen($text) % $block);
return $text . str_repeat(chr($pad), $pad);
}
$key = "12345678";
$message = "str4";
$ciphertext = des ($key, $message, 1, 1, $key,null);
//echo "stringToHex (ciphertext): " . stringToHex ($ciphertext);
//echo "<br />";
echo "base64_encode(ciphertext): " . base64_encode($ciphertext);
//echo "<br />";
//echo "encode64(ciphertext): " . encode64($ciphertext);
//echo "<br />";
//echo "base64_encode(stringToHex (ciphertext)): " . base64_encode(stringToHex ($ciphertext));
//echo "<br />";
//echo "stringToHex (base64_encode(ciphertext)): " . stringToHex (idtag_des_encode($message));
echo "<br />";
echo "idtag_des_encode: " .base64_encode(idtag_des_encode($message));
//$recovered_message = des ($key, $ciphertext, 0, 0, null,null);
//echo "\n";
//echo "DES Test Decrypted: " . $recovered_message;
?>
Ⅷ 如何用php實現和c#一致的DES加密解密
PHP實現和c#一致的DES加密解密，可以從網上搜到一大堆，但是測試後發現都沒法用。以下正確代碼是我經過苦苦才找到的。希望大家在系統整合時能用的上。
注意：key的長度為8位以內。
[csharp]viewplainprint?
//C#版DES加解密演算法
usingSystem;
usingSystem.Data;
usingSystem.Configuration;
usingSystem.Web;
usingSystem.Web.Security;
usingSystem.Web.UI;
usingSystem.Web.UI.WebControls;
usingSystem.Web.UI.WebControls.WebParts;
usingSystem.Web.UI.HtmlControls;
usingSystem.Data.SqlClient;
usingSystem.Security.Cryptography;
usingSystem.IO;
usingSystem.Text;
publicclassDes{
//加解密密鑰
privatestaticstringskey="12345678";
//初始化向量
privatestaticbyte[]DESIV={0x12,0x34,0x56,0x78,0x90,0xAB,0xCD,0xEF};
#regionDESEnCodeDES加密
publicstaticstringDESEnCode(stringpToEncrypt,stringsKey)
{
pToEncrypt=HttpContext.Current.Server.UrlEncode(pToEncrypt);
DESCryptoServiceProviderdes=newDESCryptoServiceProvider();
byte[]inputByteArray=Encoding.GetEncoding("UTF-8").GetBytes(pToEncrypt);
//建立加密對象的密鑰和偏移量
//原文使用ASCIIEncoding.ASCII方法的GetBytes方法
//使得輸入密碼必須輸入英文文本
des.Key=ASCIIEncoding.ASCII.GetBytes(sKey);
des.IV=ASCIIEncoding.ASCII.GetBytes(sKey);
MemoryStreamms=newMemoryStream();
CryptoStreamcs=newCryptoStream(ms,des.CreateEncryptor(),CryptoStreamMode.Write);
cs.Write(inputByteArray,0,inputByteArray.Length);
cs.FlushFinalBlock();
StringBuilderret=newStringBuilder();
foreach(bytebinms.ToArray())
{
ret.AppendFormat("{0:X2}",b);
}
ret.ToString();
returnret.ToString();
}
#endregion
///<summary>
///
///</summary>
///<paramname="pToDecrypt">待解密的字元串</param>
///<paramname="sKey">解密密鑰,要求為8位元組,和加密密鑰相同</param>
///<returns>解密成功返回解密後的字元串，失敗返源串</returns>
#regionDESDeCodeDES解密
publicstaticstringDESDeCode(stringpToDecrypt,stringsKey)
{
//HttpContext.Current.Response.Write(pToDecrypt+"<br>"+sKey);
//HttpContext.Current.Response.End();
DESCryptoServiceProviderdes=newDESCryptoServiceProvider();
byte[]inputByteArray=newbyte[pToDecrypt.Length/2];
for(intx=0;x<pToDecrypt.Length/2;x++)
{
inti=(Convert.ToInt32(pToDecrypt.Substring(x*2,2),16));
inputByteArray[x]=(byte)i;
}
des.Key=ASCIIEncoding.ASCII.GetBytes(sKey);
des.IV=ASCIIEncoding.ASCII.GetBytes(sKey);
MemoryStreamms=newMemoryStream();
CryptoStreamcs=newCryptoStream(ms,des.CreateDecryptor(),CryptoStreamMode.Write);
cs.Write(inputByteArray,0,inputByteArray.Length);
cs.FlushFinalBlock();
StringBuilderret=newStringBuilder();
returnHttpContext.Current.Server.UrlDecode(System.Text.Encoding.Default.GetString(ms.ToArray()));
}
#endregion
}
[php]viewplainprint?
<?php
classDES
{
var$key;
var$iv;//偏移量
functionDES($key,$iv=0){
//key長度8例如:1234abcd
$this->key=$key;
if($iv==0){
$this->iv=$key;//默認以$key作為iv
}else{
$this->iv=$iv;//mcrypt_create_iv(mcrypt_get_block_size(MCRYPT_DES,MCRYPT_MODE_CBC),MCRYPT_DEV_RANDOM);
}
}
functionencrypt($str){
//加密，返回大寫十六進制字元串
$size=mcrypt_get_block_size(MCRYPT_DES,MCRYPT_MODE_CBC);
$str=$this->pkcs5Pad($str,$size);
returnstrtoupper(bin2hex(mcrypt_cbc(MCRYPT_DES,$this->key,$str,MCRYPT_ENCRYPT,$this->iv)));
}
functiondecrypt($str){
//解密
$strBin=$this->hex2bin(strtolower($str));
$str=mcrypt_cbc(MCRYPT_DES,$this->key,$strBin,MCRYPT_DECRYPT,$this->iv);
$str=$this->pkcs5Unpad($str);
return$str;
}
functionhex2bin($hexData){
$binData="";
for($i=0;$i<strlen($hexData);$i+=2){
$binData.=chr(hexdec(substr($hexData,$i,2)));
}
return$binData;
}
functionpkcs5Pad($text,$blocksize){
$pad=$blocksize-(strlen($text)%$blocksize);
return$text.str_repeat(chr($pad),$pad);
}
functionpkcs5Unpad($text){
$pad=ord($text{strlen($text)-1});
if($pad>strlen($text))
returnfalse;
if(strspn($text,chr($pad),strlen($text)-$pad)!=$pad)
returnfalse;
returnsubstr($text,0,-1*$pad);
}
}
?>