ftp無法解碼python
① 怎麼解決python在連接ftp時報錯：EOFError
Errno 10060是連接超時的錯誤代碼。
2種可能：網路不通 或者的21埠上沒有開啟ftp服務
1、Error後面沒有錯誤代碼
2、我使用SSH自帶的ftp可以打開，說明並不是網路的問題
PS：復制粘貼的答案吧，Error都打錯了？
② ftp域名無法解析
你是通過校園網還是外網進入呢？可能外網不能訪問校園網，所以你不能進去FTP
③ 訪問ftp伺服器時無法解析伺服器名稱和地址
是在同一台機器上么？如果是的可能是你的配置有問題，但如果不是，最大的可能性就是你的ip地址被鎖了。在C:\WINDOWS\system32\drivers\etc文件夾下面用文本文件打開HOSTS文件127.0.0.1 本地地址下 加上自己的IP地址和域名如： 192.168.0.53 ****.vicp.net
④ ftp區域網無法解析伺服器地址怎麼辦
不太明白你的意思，是ftp軟體無法解析外網的伺服器地址還是說你要用區域網裡面的一台電腦做FTP伺服器，其他電腦無法訪問？
⑤ Python中FTP 上傳出現10060錯誤，怎麼解決
連接類型
2.FTP伺服器故障
3.埠
試下用ACTV mode看看？
ftp.set_pasv(False)
⑥ ftp文件夾錯誤 無法解析伺服器的名稱和地址
無法解析伺服器的名稱和地址，明顯的是DNS故障了。
如果是空間商的問題，應該是提示到目標地址無法鏈接。
兩回事。
⑦ python ftp permission denied怎麼解決
FTP 550 Permission denied 只能建文件夾，沒法刪除及上傳文件的解決方法，需要的朋友可以參考下。
出現這種問題，
①首先檢查用戶對應的角色名，然後看路徑設置是否正確，有沒有相關的許可權，如果這些都沒問題，然後就嘗試下面的操作：
②重起FTP服務，最好從服務裡面重啟(不能根本解決)；
③重新設置Server-U帳號和目錄訪問里的文件路徑(如果還不行，嘗試下面操作)；
④刪除用戶，重新建。
原創 SU整理（FTP)收藏
整理如下：
1開頭-成功
2開頭-成功
3開頭-許可權問題
4開頭-文件問題
5開頭-伺服器問題
150 FILE: %s
150 Opening %s mode data connection for %s (%I64d Bytes).
150 Opening %s mode data connection for %s.
150 Opening ASCII mode data connection for /bin/ls.
150 Opening BINARY mode data connection for MLSD.
200 (end of 'index %s')
200 Command channel switched to clear-text.
200 Command OK, %I64d Bytes available on %s
200 Command okay.
200 EXEC command successful (TID=%u).
200 Message received okay.
200 MLST OPTS
200 MODE S ok.
200 MODE Z LEVEL set to %d.
200 MODE Z ok.
200 Noted.
200 Opened OK (but not really).
200 PBSZ command OK. Protection buffer size set to 0.
200 PBSZ=0
200 PORT Command successful.
200 PROT command OK. Using clear data connection.
200 PROT command OK. Using private data connection.
200 SSCN:CLIENT METHOD
200 SSCN:SERVER METHOD
200 STRU F ok.
200 STRU R ok.
200 Transfer progress notification is off.
200 Transfer progress notification is on.
200 Type set to A.
200 Type set to I.
202 Command not implemented, superfluous at this site.
202 Command not implemented, superfluous at this site.
210 UTC%+ld
211 End
211 End of status.
211-Extension supported
211-Status for user %Name from %IP:
213 %I64d
213 %s
214 Direct comments or bugs to [email protected].
214- The following commands are recognized (* => unimplemented).
215 UNIX Type: L8
220 Service ready for new user.
220 Serv-U FTP Server v%s for WinSock ready...
221 Goodbye!
226 ABOR command successful.
226 Transfer complete.
226 Transfer complete.
226 Transfer complete.
227 Entering Passive Mode (%d,%d,%d,%d,%d,%d)
230 Password changed okay.
230 Switching to SYSTEM MAINTENANCE mode.
230 User logged in, proceed.
230 User logged in.
231 Switching to GROUP MAINTENANCE mode.
232 Switching to DOMAIN MAINTENANCE mode.
233 Switching to READ-ONLY MAINTENANCE mode.
233 User logged in, PASSWORD EXPIRED - please change before proceeding.
234 AUTH command OK. Already have SSL connection.
234 AUTH command OK. Initializing SSL connection.
250 %X
250 DELE command successful.
250 Directory changed to %s
250 End.
250 RMD command successful.
250 RNTO command successful.
250-Listing %s
253 Attributes changed okay.
253 Date/time changed okay.
257 "%s" directory created.
257 "%s" is current directory.
321 Transferred %I64d Bytes.
331 Response to otp-md%d %u %s required for skey.
331 User name okay, need password.
331 User name okay, please send complete E-mail address as password.
350 File or directory exists, ready for destination name
350 Restarting at %I64d. Send STORE or RETRIEVE.
421 Data connection closed (SSL/TLS negotiation failed).
421 Service closing control connection.
425 Cannot open data connection.
425 Cannot open data connection.
425 Cannot open data connection.
425 Try later, data connection in use.
425 Try later, data connection in use.
425 Try later, data connection in use.
425 Try later, out of network sockets.
425 Try later, out of network sockets.
425 Try later, out of network sockets.
425 Unable to listen, too many pending PASV requests from same client IP.
425 Unable to set up passive listening socket.
426 Data connection closed, cannot read file %s.
426 Data connection closed, cannot write file %s - disk full?
426 Data connection closed, error compressing data stream.
426 Data connection closed, error decompressing data stream.
426 Data connection closed, file transfer %s aborted by client.
426 Data connection closed, file transfer %s aborted.
426 Data connection closed, receive file %s aborted.
426 Data connection closed, transfer aborted.
426 Transfer aborted.
431 Account temporarily locked for other user, please try later.
431 Password not changed, no match for old password.
431 Unable to negotiate secure command connection.
432 Password not changed, new password should be at least %d characters in length.
432 Password not changed, new password should contain at least one upper-case character and symbol
432 Password not changed, old and new passwords cannot be identical.
450 Cannot open file %s for reading.
452 Sorry, insufficient disk quota - receive file %s aborted.
500 '%s': command not understood.
501 %s: Not a directory.
501 Cannot EXEC command line (error=%u).
501 Invalid MLST options
501 Invalid option.
501 Not enough space, only %I64d Bytes available on drive %s
501 Permission denied.
501 SITE option not supported.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Syntax error in parameters or arguments.
501 Wildcards not allowed.
502 Syntax error - use SITE PSWD "<oldpassword>" "<newpassword>".
503 Bad sequence of commands.
503 Bad sequence of commands.
503 Secure command connection required prior to PBSZ command.
503 Secure command connection required prior to PROT command.
504 Command not implemented for that parameter.
504 Command not implemented for that parameter.
504 Command not implemented for that parameter.
504 Unknown security mechanism.
510 Cannot determine server time zone.
521 Data connection cannot be opened with this PROT setting.
522 SSL/TLS lib refuses to initiate secure data connection.
530 Cannot change Anonymous password.
530 Cannot change password.
530 Not logged in, cannot find home directory.
530 Not logged in, home directory does not exist.
⑧ FTP問題，詳細信息：無法解析伺服器的名稱或地址
空間配置問題或者域名解析問題
1、地址處試試寫伺服器的IP地址，而不是域名。如果可以的話就是域名還沒解析到伺服器
2、如果也不行的話，伺服器的問題。